Reference: 020255476
Kit 70cc Ø47,6mm AIRSAL aluminum mono-segment sports without cylinder head for Peugeot Ludix Blaster & Jet Force 50cc
Ideal in case of wear or tightening the cylinder to a change in a single shot.
Banner
Attention, high engine reserved for competition on the circuit. Not approved on public roads.
Ideal for small budget looking for their Peugeot ludix blaster or jet force 50cc a good torquey, powerful and reliable 70cc kit at a good price! The complete kit with AIRSAL cylinder head offers very good power, it has a corrected architecture and diagrams, a Ø47.6mm aluminum cylinder with nikasil treatment, a single-segment piston to allow the highest speeds, high compression racing cylinder head ...
Its cylinder is equipped with 5 well-crafted intake transfers with an oval boosted exhaust, in aluminum alloy with nikasil coating. Delivered complete as presented, its piston is therefore the single segment model for maximum high speeds accompanied by its thin hard chrome domed segment.
The cylinder head is a very well designed high compression model, also in aluminum. The combustion chamber is hemispherical in shape, polished finish. The cooling of your engine will be greatly improved and therefore a significant performance gain will be felt at this level.
In short, this kit will certainly not achieve the power and performance of high-end MALOSSI, POLINI ... kits, but for a low price, it offers truly breathtaking benefits!
We recommend that you accompany this high engine with at least : carburetion in 19 or 21mm for the best (valve slats thickness 0.35mm), reinforced crankshaft if the original model has more than 15,000 km, racing relaxation exhaust , new cold spark plug, 100% synthetic engine oil, ...
Contains :
-X1 Aluminum cylinder 5 transfers with exhaust boosters
-X1 High compression cylinder head with hemispherical shape polished finish
-X1 Piston mono segment Ø47,6mm
-X1 Fine chrome segment 1mm thick
-X1 Piston pin Ø12mm X 40mm
-X2 G piston clips
-X2 Exhaust threaded studs
-X1 Engine seal pack
-Notice
As an option we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Mounts on PEUGEOT scooters equipped with the new liquid cooled engine / carburetor intake :
LUDIX BLASTER
BLASTER ICE BLADE
BLASTER RS12
RADICAL BLASTER
BLASTER R CUP
FORCE JET
JET C-TECH
JET FORCE R CUP
DARKSIDE JET
JET ICE BLADE
SPEEDFIGHT 3 RS
And other models.
Reference: 020255476
Ideal in case of wear or tightening the cylinder to a change in a single shot.
Reference: 060255476
Ideal for maintenance and in case of loss of compression!
Reference: 140255476
Quality seal pack for reassembly without leakage!
Reference: 040255476
The replacement head for your kits 70cc aluminum mono AIRSAL segment LUDIX BLASTER, JET FORCE ...