Banner
Very good 50cc kit for SACHS integrated cylinder head! Available with or without intake pipe.
A complete set of rare and powerful parts for the old motorcycles SACHS has integrated cylinder head. This high-quality aluminum cylinder comes straight from the EUROCILINDRO Made in Italy molds! It is equipped with 4 large intake transfers with a lubrication system internal to the cylinder and in concordance with its piston. The architecture and finish are of course excellent and top of the range. A big exhaust and high diagrams make this engine group a powerful asset for your 2 wheels! The piston which accompanies this cylinder is a bi-segment model of VERTEX therefore of high quality. With its L-shaped segment it will offer you high-end regimes. It is in addition delivered with its breech supercompresser which will allow you to make the best use of your engine while leaving a new one. In short, an excellent value / performance ratio to give life to your SACHS.
Available with or without intake pipes! If you take the model with, it comes with a carburetor pipe of 15 and 16mm SHA, and a carburetor pipe from 17.5 to 21mm PHBG (fixing 26mm).
Mounts on :
Sachs BATAVUS 50 - Motorcycles-mopeds
Sachs CITY 50 - Motorcycles-mopeds
Sachs HERCULES PRIMA 5 50 - Motorcycles-mopeds
Sachs KARSTADT 50 - Motorcycles-mopeds
Sachs M1 50 - Motorcycles-mopeds
Sachs M2 50 - Motorcycles-mopeds
Sachs M3 50 - Motorcycles-mopeds
Sachs M4 50 - Motorcycles-mopeds
Sachs M5 50 - Motorcycles-mopeds
Sachs MX1 50 - Motorcycles-mopeds
Sachs OPTIMA 3S 50 - Motorcycles-mopeds
Sachs RIXE 50 - Motorcycles-mopeds
Sachs TORROT 50 - Motorcycles-mopeds
Reference: 30120.00
Very robust and powerful kit for GUZZI DINGO 50cc 2T. Respecting the displacement of 50cc with its original diameter of 38,5mm.
Reference: 003000
Very high quality kit for ZUNDAPP 50cc SUPER TERM. RACING model with 4 transfers.
Reference: 53480.00
A high performance engine MINARELLI P6! Exhaust mounting by 3 screws for RADIAL SYSTEM.
Reference: 42100.00
50cc kit offers a power boost to your KREIDLER FLORET HP 5.2.
Reference: 64160.00
A high performance engine and full top special range for SACHS 503 and 504 in axis of 12mm with 3 long race transfers.
Reference: 64405.00
A high performance and complete high-end engine special for SACHS 503 and 504 in axis of 14mm with 3 ransferts with a crankshaft in short race.
Reference: 007200
Very high quality kit for ZUNDAPP 50cc.
Reference: 85305.00
The piston-cylinder without cylinder head 50cc for ZUNDAPP air cooling for miniterm engine.
Reference: 64400.00
A high-performance, high-performance special motor for SACHS 503 and 504 in 12mm axle with 3 ransferts with short crankshaft.
Reference: 073900/1
Very good 50cc kit for SACHS integrated cylinder head! Available with or without intake pipe.
Reference: 42110.00
50cc kit offering a boost of power to your KREIDLER FLORET HP 4,8.
Reference: 30130.00
Kit respecting the original diameter of 38.5mm for a displacement of 50mm, increased performance still present for GUZZI DINGO SPORT 50cc 2T.
Reference: 003300
Very high quality kit for ZUNDAPP 50cc SUPER TERM. SPORT model with 2 transfers.
Reference: 063700
Very high quality kit for ZUNDAPP 50cc.
Reference: 64265.00
A top-of-the-range high-performance engine special for SACHS 503 and 504 in 12-axis with 3 long-stroke transfers.
Reference: 26100.00
High engine without cylinder head PARMAKIT for FLANDRIA 50cc 2T.
