Reference: FE.G436V
Rear brake disc FRANCE EQUIPMENT wave Ø220mm for motorcycle 50cc RIEJU RS2, MATRIX, NACKED ...
Ideal for excellent braking but also a beautiful aesthetic. In 220mm for the back of your RIEJU 50cc RS2, MATRIX, NACKED ...
Banner
Ideal to change your front brake disc worn, cracked while getting a bite of gain, here is the Machinery FRANCE disk, also called wave model wave has a nice clean design to be lighter, better remove dust and get a better cooling. Steels used in its composition are more upscale, these drives are also often preferred to GALFER since they offer a better bite. In addition it is made in France!
Diameter: 280mm
Made in France
Type and brand: FRANCE WAVE Machinery
Thickness: 4mm
Internal diameter for centering: 108mm
Fixing by 7 screws, Ø 6.5mm holes
Itself on: 50cc motorcycle RIEJU RS2 MATRIX, nacked ... At the front.
Please verify that the disk arises well on your bike before ordering !!!
Reference: FE.G436V
Ideal for excellent braking but also a beautiful aesthetic. In 220mm for the back of your RIEJU 50cc RS2, MATRIX, NACKED ...
Reference: 319985
Ideal for a refurbishment of your front brake disc!
Reference: 452079
Ideal to remake its braking system before it Ø218mm model fits the DERBI senda before 1999. Fixing 3 screws.
Reference: 440734
Ideal to remake its braking system before it Ø260mm model fits the PEUGEOT XR6. Fixing screws 5.
Reference: FE.A455
Very high quality disc MADE IN FRANCE!
Reference: LMP116ST
Organic standard brake pads for various old motorcycle market!
Reference: 22131
For insured braking! IGM quality disc.
Reference: 440747
Ideal to remake its braking system before it Ø220mm model fits the GILERA GSM. 6 fixing screws.
Reference: GF708WD
Wave brake disc (wave) GALFER for the front of your DERBI SENDA SM DRD 50cc.
Reference: FE.H497
SPORT disc, mounts on some 250cc motorcycles, 300cc but especially on GENERIC TRIGGER ... Disc lightweight and very powerful!
Reference: 174.0035
Platelets of very good quality that will allow excellent braking.
Reference: 483296
Ideal to remake its braking system before it Ø260mm model fits the mécaboite RIEJU SMX, RRX, MRX, SMT, SPIKE .... 6 fixing screws.
Reference: FE.D413
Brake disc made in France in the best steels!
Reference: FE.S448
Original type disc fixing 3 holes, Ø180mm outside and 62mm inside, thickness 4mm!
Reference: 6591103
Very good quality floating front brake disc for APRILIA / DERBI.
Reference: KF.002324
AP RACING by FRANCE EQUIPEMENT front brake kit for the front of your APRILIA 50 RS, 125 RS, DERBI 50 GPR ...
Reference: 483297
Ideal to remake the front brake on your PEUGEOT XR7.