Reference: 201.0168
Carburetor POLINI PWK 28 flexible choke has lever without separate greasing
A KEIHIN copy reviewed and corrected by POLINI! Also available in 24, 26 and 30mm!
Banner
Ideal for a good big kit on your APE, here is the special admission kit PWK on PIAGGIO APE. This kit lets you pass on a system with valves (gain of torque and high speed) and allows you to pass a big PWK carburetor.
The diameter of the sleeve is 36mm on both sides, the internal diameter of the pipe is 31mm. This kit is therefore suitable for PWK carburettors from 24 to 32mm! The part is delivered complete with pipe, sleeve, clamps, joints, screws, box, valves, carbon slats, abutments cut ... Internal diameter of the sleeve of 36mm!
Available in short and normal version! To choose where you want to place your carburetor! More or less far from the engine.
Reference: 201.0168
A KEIHIN copy reviewed and corrected by POLINI! Also available in 24, 26 and 30mm!
Reference: 201.0169
A good quality 30mm carburetor with a super low price! Also available in 24, 26 and 28mm!
Reference: 201.0170
A special carburetor big configuration! Also available in 24, 26, 28 and 30mm!
Reference: 213.0524
Ideal for improving your performance.
Reference: 215.0233
For an improved admission with carburettor POLINI CP 24mm, fixing by 3 holes! High performances guaranteed!
Reference: 2713719.C0
The famous MALOSSI MHR TEAM! Attention, require to mill the casings for the installation!
Reference: 213.0599
Planks for manufacturing POLINI carbon valve slats, certified high quality! Available in 0.25, 0.28, 0.30, 0.33, 0.35, 0.40 and 0.45mm. For all 2-stroke engines, choice of thickness!
Reference: 213.0010
Replacement valves for pipes with special valves POLINI.
Reference: 215.0270
Valve inlet kit for increased performance, pipe fitting Ø 23mm.
Reference: 27 9490.C0
Valves VL13, very powerful! Above the VL11!
Reference: 27 7366.C0
MALOSSI Carbon Cutting Boards available in 0.30, 0.35 and 0.40mm. Top of the line. For manufacturing slats on a 2-stroke engine, thicknesses to choose from!
Reference: 27 7366.K0
Two 100X100mm boards in Karbonit MALOSSI available in 0.30, 0.35 and 0.40mm. It can be cut and therefore adapts to all 2-stroke motor vehicles. Choice of thickness.
Reference: 213.0055
High quality valves with blue anodized aluminum base!
Reference: 213.0012
High-end valves complete with slats. To be assembled in the pipes admission kits with POLINI valves from VESPA, APE ...
Reference: 215.0204
Ideal to pass on a system has flaps and thus to gain in couple, power and consomation! To accompany a 17,5mm POLINI CP special for the best!
Reference: 215.0202
Unique and powerful design, POLINI monolamelle system for VESPA scooter.
Reference: 215.0118
Valve system with flexible sleeve for increased power and torque!
Reference: 27 7708.C0
A valve box very well studied for a gain in power and considerable recovery.
Reference: 215.0203
Unique and powerful design, POLINI monolamelle system for VESPA carburizing scooter in 19 or 21mm diameter with 2 fixing holes. For carburettors origin or CP POLINI!
Reference: 215.0116
Inlet kit with single-flap valves! Gain of torque and very high power in relation to a mounting without valves. For carburetor of origin or CP 19 and 21mm rigid special or flexible standard.