![MALOSSI box (pipe+box+valves) Peugeot 103 sp, mvl, lm, ... original casings MALOSSI box (pipe+box+valves) Peugeot 103 sp, mvl, lm, ... original casings](https://www.rrd-preparation.com/401-large_default/malossi-valve-box-pipe-box-valves-peugeot-103-sp-mvl-lm-original-housings.jpg)
Reference: 27 5034.K0
Valves 4 slats VL7 for MALOSSI valve box on Peugeot 103 and MBK 51
What to repair your complete MALOSSI valve box on PEUGEOT 103, MBK 51 ... By having in addition the KARBONIT or CARBON option.
Banner
The Malossi competition valve box makes it possible to favor gas intake very strongly, especially on Peugeot 103 where the original intake is really not famous. It consists of an extra short rigid pipe, a large aluminum box for passing large valves, and finally competition valves 4 karbonit 0.30mm VL7 blades.
It will therefore allow you in combination with a housing preparation to have a good big intake without too much loss of pre-compression. The pipe is micro-billed in the rules of the art and the venturization is very good. For carburetors over 19mm we recommend removing the lamella stops.
These kits have been produced to increase the power of the engines on which a sports transformation is applied for competition.
GUARANTEES : The components of the kit are guaranteed without manufacturing defects.
Defective parts may be returned to us (free of charge) only if we give permission.
The pack includes
Pipe in 15 or 21mm
Complete set of seals
Aluminum extension box
Valves 4 louvre karbonit 0.30mm VL7
Notice
Spare parts :
Karbonit vl7 / vl8 valve strips
Carbon vl7 / vl8 valve louvres
Complete valves Option VL8 competition
Select the valve box in 15 or 21mm before purchase .
-On the d.15mm you can adapt the carburetors 14,15 and 16mm dellorto SHA model. Carburetor mounting diameter: 19mm internal pipe diameter: 15mm
-On the d.21mm you can fit the carburetors 19,20,21 and 22mm dellorto PHBG model. Carburetor mounting diameter: 24mm internal pipe diameter: 19mm
Reference: 27 5034.K0
What to repair your complete MALOSSI valve box on PEUGEOT 103, MBK 51 ... By having in addition the KARBONIT or CARBON option.
Reference: 02 5035B
The best to repair or modify the size of your MALOSSI valve boxes on your PEUGEOT 103 or MBK 51.
Reference: 11 5252B
A high-end seal pack for leak-free reassembly.
Reference: 27 5610.K0
The best to have the quality KARBONIT MALOSSI fiberglass at the correct price, and especially to choose the appropriate thickness for the maximum performance of its engine, is mounted on PIAGGIO CIAO with MALOSSI and PEUGEOT 103 or MBK 51 casings with complete valve box MALOSSI.
Reference: 27 2643.K0
The luxury version of the VL7, an aluminum base, vulcanized ...
Reference: 27 5034.K0
What to repair your complete MALOSSI valve box on PEUGEOT 103, MBK 51 ... By having in addition the KARBONIT or CARBON option.
Reference: 215.0300
Enough to improve as it should the admission of your 103, ideal accompanied by a 15 or 16mm SHA carburetor!
Reference: 27 5614.K0
A set of KARBONIT slats, very nice to adjust your machine to the thickness of the valve slats by taking advantage of a good quality of KARBONIT fiber for a nicer cost than carbon.
Reference: 20 6856
Ideal for increasing performance, especially with a large kit, a pack that includes everything needed between the carburettor and the crankcases. Have
Reference: CAL02RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on PEUGEOT 103 engine with POLINI housings, with built-in brackets.
Reference: 27 7366.K0
Two 100X100mm boards in Karbonit MALOSSI available in 0.30, 0.35 and 0.40mm. It can be cut and therefore adapts to all 2-stroke motor vehicles. Choice of thickness.
Reference: 27 4235.K0
Valves that are suitable for both small and large configurations.
Reference: 526206
The famous complete valve box at a low price, delivered with its pipes for SHA and PHBG carburetors!
Reference: 1213035B
An obligatory product for a perfect functioning of the gas supply.
Reference: 247766
Valves mounted in mono-lamelle fiberglass for your 103.
Reference: 27 5616.C0
A specific high-end set for your VL1 valves! Set your machine to perfection by choosing the best thickness and choosing noble materials for your slats!
Reference: 2718510
The best way to get MALOSSI carbon quality at the right price, and above all to choose the appropriate thickness for the maximum performance of your engine, is mounted on a VL18 valve box!
Reference: 27 2356.K0
Racing valves with a very studied base passed in single-leaf, available in karbonit or carbon!
Reference: 213.0017
Delivered with pipe and valve seal, carbon single-blade with refined stops ... The top for 103!
Reference: 213.0524
Ideal for improving your performance.
Reference: 365117
Valves mounted in mono-slat carbon 0.35mm for your 103!
Ideal for gaining performance, especially with large kits!