Reference: 213.0020
2 slats POLINI valves for valve box and casings without support Peugeot 103 and MBK 51
Valves for POLINI, DR RACING, ATHENA ...
Banner
For all your Peugeot 103 sp, mv, mvl, lm… equipped with original casings, to improve your admission there are the famous POLINI valve boxes. This valve box in combination with a suitable carburetor will promote gas passage, power and recovery without adding too much dead volume in the intake.
Indeed, on Peugeot 103 the admission, the original valves are really badly made and badly studied, they enter very quickly in frequency of vibrations if only because of how they are placed.
This box will therefore be much better placed, it passes through 2 very good quality 0.30mm carbon slats in order to have a much better curve. You can also add the article vulcanized valve box to further increase the performance of your moped. This complete POLINI valve box will especially win you in high speeds. We advise to remove the stops slats on this box, they really obstruct the admission too.
This box is 15mm in size so intended for Ø14 to 16mm DELLORTO SHA rigid carburettors (19mm fixing)
Between the 15 and 19mm model, only the pipe changes. You can very well make pass a 15 in 19 and vice versa.
The pack is delivered complete :
-Extension box
-Full screws
-Pack full seal
-Valves 2 carbon 0.30mm slats
-Pipe rigid aluminum in 15mm
- Explanatory note, advice and assembly
Reference: 213.0020
Valves for POLINI, DR RACING, ATHENA ...
Reference: 215.0308
The replacement pipe for valves boxes POLINI on PEUGEOT 103 SP, MV, LM ...
Reference: 209.0260
Complete gasket set for POLINI valve box on PEUGEOT 103.
Reference: 213.0032
Spare valves for POLINI casings with incorporated support of PEUGEOT 103 and MBK 51.
Reference: 27 5616.K0
Ideal for selecting the right slat thickness for your machine, made of high-end KARBONIT MALOSSI fiberglass.
Reference: 27 5616.C0
A specific high-end set for your VL1 valves! Set your machine to perfection by choosing the best thickness and choosing noble materials for your slats!
Reference: 20 6138
Ideal to put a carburetor DELLORTO 21 PHBG on your PEUGEOT XP using a system of real valves!
Reference: 2718510
The best way to get MALOSSI carbon quality at the right price, and above all to choose the appropriate thickness for the maximum performance of your engine, is mounted on a VL18 valve box!
Reference: 20 6856
Ideal for increasing performance, especially with a large kit, a pack that includes everything needed between the carburettor and the crankcases. Have
Reference: 213.0017
Delivered with pipe and valve seal, carbon single-blade with refined stops ... The top for 103!
Reference: 002312
The only vulcanized valves on the market for PEUGEOT 103, with the added advantage of fiberglass slats!
Reference: 213.0599
Planks for manufacturing POLINI carbon valve slats, certified high quality! Available in 0.25, 0.28, 0.30, 0.33, 0.35, 0.40 and 0.45mm. For all 2-stroke engines, choice of thickness!
Reference: 27 5610.K0
The best to have the quality KARBONIT MALOSSI fiberglass at the correct price, and especially to choose the appropriate thickness for the maximum performance of its engine, is mounted on PIAGGIO CIAO with MALOSSI and PEUGEOT 103 or MBK 51 casings with complete valve box MALOSSI.
Reference: 27 5034.K0
What to repair your complete MALOSSI valve box on PEUGEOT 103, MBK 51 ... By having in addition the KARBONIT or CARBON option.
Reference: 27 5614.K0
A set of KARBONIT slats, very nice to adjust your machine to the thickness of the valve slats by taking advantage of a good quality of KARBONIT fiber for a nicer cost than carbon.
Reference: 635
With its steel slats clicking, original type, good quality!
Reference: 27 2643.K0
The luxury version of the VL7, an aluminum base, vulcanized ...
Reference: 365117
Valves mounted in mono-slat carbon 0.35mm for your 103!
Reference: 215.0301
The famous POLINI valve box greatly improves the admission, ideal accompanied by a PHBG carburetor in 17 to 21mm rigid!