Reference: 215.0245
Valve box Ø15mm 2 slats with pipe POLINI MBK 51, motobecane AV10
High-end POLINI 15mm diameter valve box for MBK 51.
Banner
Here are the PARMAKIT racing intake valves, they have two 0.25mm fiberglass slats, these slats are suitable for engines that exploit the medium speed systems such as original engines, small 50cc kits and 70cc kits.
The base is made of aluminum, the change of the slats is greatly facilitated thanks to fasteners by screws. The slats stops are drilled to avoid gas clusters. They come with the valve seal. We advise on small or large configurations operating at 8000/9000 rpm.
These valves have a good thickness of aluminum, so they will be easily prepared to make a round entry for example!
Reference: 215.0245
High-end POLINI 15mm diameter valve box for MBK 51.
Reference: 13800213
The intake pipe pack + valves G1 / G2 BIDALOT!
Reference: 213.0020
Valves for POLINI, DR RACING, ATHENA ...
Reference: 20 5123
Out of production.
Reference: 13700213
Competition valves for BIDALOT G1/G2 casings on MBK 51.
Reference: 215.0246
High-end 19mm diameter valve box POLINI for MBK 51.
Reference: 27 5618.C0
An excellent game slide for fine adjustments!
Reference: 213.0032
Spare valves for POLINI casings with incorporated support of PEUGEOT 103 and MBK 51.
Reference: 213.0036
High quality valves, delivered with 2 different thicknesses of carbon slats!
Reference: 27 3021.K0
Competition valves, ideal for large or small configuration, for a gain in power and considerable recovery.
Reference: 27 5610.K0
The best to have the quality KARBONIT MALOSSI fiberglass at the correct price, and especially to choose the appropriate thickness for the maximum performance of its engine, is mounted on PIAGGIO CIAO with MALOSSI and PEUGEOT 103 or MBK 51 casings with complete valve box MALOSSI.
Reference: 27 5034.K0
What to repair your complete MALOSSI valve box on PEUGEOT 103, MBK 51 ... By having in addition the KARBONIT or CARBON option.
Reference: 27 5618.K0
High-end slats that will allow you to properly adjust your valve box.
Reference: 004012
Ideal for preparing your engine! High quality, ATHENA Racing valves.
Reference: 51303.12
Valves with fiberglass slats thickness 0.25mm, ideal for a motor origin until the small kit 70cc.
Reference: 27 7366.C0
MALOSSI Carbon Cutting Boards available in 0.30, 0.35 and 0.40mm. Top of the line. For manufacturing slats on a 2-stroke engine, thicknesses to choose from!