Reference: 27 5618.C0
4 slices (0.30 + 0.35 mm) CARBON MALOSSI for MBK 51 / av10 motobecane
An excellent game slide for fine adjustments!
Banner
MALOSSI VL2 competition valves for MBK 51, MOTOBECANE engine AV10 and EV50. A case reworked in abs which has KARBONIT (special fiberglass) slats 0.30mm thick and end aluminum slats easily modular and light, very powerful have however regret that there are no seals delivered with the valves and that the slat plane is not joined either.
They are of a different shape from the original in order to disseminate the admission as well as possible. A notice is delivered with it because it is necessary to rework the housings slightly in order to pass them. They are the best single valves (except box) released for AV10 on the market thanks to their special shape and their larger inlet. We will appreciate the fixing of the slat stops by screws, this allows you a simple change of the slats, in addition, there are special adjustment slats vl2 in carbon or karbonit MHR of different thicknesses.
spare parts :
Reference: 27 5618.C0
An excellent game slide for fine adjustments!
Reference: 27 5618.K0
High-end slats that will allow you to properly adjust your valve box.
Reference: 4066
Ideal for leak-free winding at a lower cost for a more reliable engine.
Reference: M813002000001
Paste with elastic joint and resistant to high temperatures. (300 ° C)
Reference: 27 2643.K0
The luxury version of the VL7, an aluminum base, vulcanized ...
Reference: 213.0524
Ideal for improving your performance.
Reference: 215.0246
High-end 19mm diameter valve box POLINI for MBK 51.
Reference: 213.0013
RACING valves with diffuser, mono-slats for housings POLINI 103, 51, MINICROSS POLINI , APE...
Reference: 20 5123
Out of production.
Reference: 215.0245
High-end POLINI 15mm diameter valve box for MBK 51.
Reference: 247751
A well worked room for a considerable performance boost on your MBK.
Reference: 4067
Ideal for a refurbishment of the carburation on your moped AV10!
Reference: 27 5618.K0
High-end slats that will allow you to properly adjust your valve box.
Reference: 27 3021.K0
Competition valves, ideal for large or small configuration, for a gain in power and considerable recovery.
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 27 3407.C0
The MALOSSI valves has special specific inclination for the G2 casings of the same brand on MBK 51! Can also be mounted on old motorcycles 80cc 2T YAMAHA and HONDA!
Reference: 27 5618.C0
An excellent game slide for fine adjustments!
Reference: 213.0020
Valves for POLINI, DR RACING, ATHENA ...
Reference: 27 7366.K0
Two 100X100mm boards in Karbonit MALOSSI available in 0.30, 0.35 and 0.40mm. It can be cut and therefore adapts to all 2-stroke motor vehicles. Choice of thickness.
Reference: 213.0032
Spare valves for POLINI casings with incorporated support of PEUGEOT 103 and MBK 51.