
Reference: EC02
Muffler MVT CARRERA low passage for DERBI
A very good exhaust that can agree with very good kit 50cc kit same as 70cc in long run!
Banner
Not homologated on road, only reserved for the competition.
Here is a very large exhaust called YASUNI R4. One of the best pots for very large configurations. It will get all the power to your 80cc engine and more in long race or not.
This exhaust is delivered complete, with all the necessary assembly for each machine with DERBI Euro 1, 2 and 3 engine, with a very neat mounting, the fixing lugs are all adjustable. Aesthetic level and noise is enormously indescribable, the muffler gives a very nice fashionable look with its satin black, it must be tested to understand the expertise of YASUNI. The pot being very thin (8/10), the resonance is at the top, the high revs too, it is really necessary to put this exhaust on engines over-boosted and well adjusted.
Technically, this exhaust is realized in the following way :
- Steel sheet thickness 8 / 10th mm, laser cut
- Unit rolling of each cone
- Unitary welding of the seam of each cone by TIG welding
- Setting up each cone and pointing by TIG welding
- Welding of the pot by oxy-acethylene
- Each weld is tapped, so as not to have a weld bead inside the pot
These different devices allow this pot to have excellent acceleration, without compromising the length and high speeds! This exhaust is already much about him on meetings, competitions, runs, he is at the top at all levels.
With a very large configuration, this exhaust will develop a huge torque, an inexplicable recovery and high revs breathtaking.
Reference: EC02
A very good exhaust that can agree with very good kit 50cc kit same as 70cc in long run!
Reference: TUB820TB
One of the best pots for 80cc to 94cc, very known especially in the middle of the runs thanks to a light weight, amazing power, a racing look and increased strength.
Reference: VCR-RD15192/RE
A homologated and powerful exhaust for the original engines, 50cc competition and 70cc entry-level.
Reference: 15000787
2017 80cc version, BIDALOT RACING FACTORY exhaust for DERBI SENDA, SM, ENDURO, X-TREM, GPR...! Special 4-hole assembly for BIDALOT RF-WR 80 kit.
Reference: 1014-S
Simple but light and sporty exhaust for old DERBI C-4 50 machines
Reference: 33652HF + 33654HF
A complete exhaust with silencer choices, model passage low, approved!
Reference: S6-9519305/BO
An excellent STERETRACE exhaust system designed for 80cc and 90cc
Reference: S6-96193951/BO
An excellent hyper racing exhaust pot designed for 90cc and 100cc
Reference: S6-9118904/BO
An excellent hyper racing exhaust pot designed for 50cc.
Reference: ESC-03
A pot very well designed for the most torquey high engines. In addition it has a good finish and a very high manufacturing quality.
Reference: 1008-S
Simple but light and sporty exhaust for old DERBI TRICAMPEONA 50 machines
Reference: S6-96193851/BO
An excellent super racing exhaust pot designed for 80cc and 90cc
Reference: EC08
A very good competition exhaust, ideal for large engine configurations!
Reference: 3212667
One of the best pot-approved market. It is steel sheet thickness of 1mm to prevent vibrations while maintaining a very low weight.
Reference: S6-9118903/BO
An excellent hyper racing exhaust pot designed for 50cc.
Reference: 017703
Ideal for any bike DERBI, a pot very fashionable, very short, with silecieux black and green logo!