Reference: SIL-001
Silencer, cartridge BRK competition Competition 3 holes between axis 40mm for Derbi, minarelli am6
The replacement muffler with carbon casing to exhaust BARIKIT BRK Competition in low passage.
Banner
This exhaust is completely unbridled, reserved exclusively for competition on the circuit, runs... with a high engine 80cc and more in long stroke 45 and 46mm with large diameter 50 to 55mm.
Ideal to accompany a configuration prepared with 90 to 100cc hyper racing kit and to release the performance of your engine. This BARIKIT exhaust from the BRK Competition range will be perfect for this use. It makes it possible to exploit even more high speeds thanks to its architecture and its volumes revised upwards in comparison to its little brother made for 70cc kits.
In fine rolled welded jail, its resonance is always excellent. As for the finish, it is smooth and clean. The welds are of quality and stamped to avoid being in relief. Unvarnished finish with a laser-cut and BRK-engraved aluminum plate, it has no flange at the inlet, internally or at the outlet. It is an exhaust exclusively intended for competition on the circuit, run... .
Its silencer is still the carbon model, small black angled outlet, excellent finish, smooth and very successful. In terms of aesthetics, it brings a real visual asset thanks to the materials used, the finish, its bulky body, the carbon silencer... . Delivered complete as presented with silencer gasket, silencer fixing nut, two removable head springs 78mm long, reduction ring 28 to 25mm, silencer collar, spacer, sticker.
Installs on mécaboite MINARELLI AM6 "supermotard" engine, ideally with a motor mounted in 45mm or 46mm stroke in large diameter 50 to 55mm.
Reference: SIL-001
The replacement muffler with carbon casing to exhaust BARIKIT BRK Competition in low passage.