Exhaust TK TURBO KIT for QUAD MASAI 50 (XL, L50, R50 XL...) DINLI DL601, SMC 50 EXPLORER PROTECTOTR

Installs on old and new models! Ideal for gaining performance and refurbishing the exhaust system of your quad MASAI, SMC 50 EXPLORER PROTECTOR, or DINLI DL 601 50cc 2-stroke engine, here is the QUAD 50 exhaust from the manufacturer TURBO KIT (TK).

Most owners of QUAD MASAI 50cc, SMC 50cc EXPLORER PROTECTOR and DINLI DL601 are tired of this lack of speed, it's understandable since the original MASAI or DINLI DL 601 does not exceed 50km/h even unbridled!!

The MASAI 50 XL, L, R50 XL... Output about 4.5hp at 6800 rpm and 4.4nm at 6000 rpm! And this for the weight of 150kg + the driver! You have to start with the exhaust first.

Here, it is an exhaust in hydroformed steel jail, welded then varnished, the volumes are studied so as to obtain more power (ideal on a model with variator which does not exploit the low modes correctly).

It has a good quality aluminum silencer! It also offers a very good weight gain compared to the original exhaust! On the design side, it is also a nicer model than the original. The exhaust is obviously varnished so as to protect the exhaust from rust! We will get about 6.5hp at 8500 rpm and 6nm of torque at 6200 rpm in combination with a good variator like the POLINI !

Know that by installing a good 70cc kit as well as racing valves, a 19mm or 21mm carburettor, you will reach a total power of 9.5hp at 9000 rpm!

And about 8.5nm of torque from 6000 rpm! Either a cruising speed of 80/85 km/h and all that with reliability!

If you decide to opt for this configuration:

Pot + 70cc kit + sport variator + 19 or 21mm carburettor + racing valves.

We strongly recommend that you modify your final drive by adding an extra tooth or two to the pinion! You can also add a racing clutch to make up for the loss of acceleration.

Know that TK alias TURBO KIT SL is a Spanish manufacturer of exhausts since 1966. Although not widespread in France, Belgium and Luxembourg because of the relatively high price of the products, it is a very well-known brand. All products are tested on a test bench for maximum performance, the materials used are European and the manufacturing techniques too, which makes them quality equipment!

View of the assembly on a MASAI 50 :

Attention for the A50XL you will have to adapt a binding!

Mounts on:

MASAI 50XL

MASAI 50 L50

MASAI 50 R50XL ...

SMC 50 EXPLORER PROTECTOR

DINLI DL 601 50