Reference: MLR502R10
Exhaust muffler spring treated YASUNI long model (70mm)
A small spring very convenient in case of loss or breakage. In addition it is treated not to oxidize. This spring can be put on the cartridge as well as the motor.
Banner
Certified on-road pot, delivered with certificate of approval!
The YASUNI R2 exhaust is the excellent compromise between the R1 and R3! This welded rolled polish with fine junk for better resonance will offer you significantly more performance on 50 and 70cc medium power kits after unclamping.
However the pot will lose its compliance and will not be allowed on public roads. Very solid, the materials are of excellent quality!
This exhaust does not make too much noise and offers a very good torque / power ratio! Several finishes available for the silencer: Kevlar, aluminum or the famous carbon also called black edition!
As you can see in the photo it comes with several adapters. So you can easily mount it on other AM6 and DERBI supermotard.
This model is based on :
Beta Years
RR 50 Motard Track 2004
RR Enduro 50 2002 to 2004
RR SM 50 1998 to 2004
Mbk Years
X-Limit 50 1998 to 2004
Pieces Peugeot Years
XP6 50 all
XPS 50 Street all
XPS Enduro 50 all
XPS SM 50 all
Rieju Years
MRT 50 all
MRX 50 all
RRX 50 all
SMX 50 all
Tango all
Yamaha Years
DT 50 R 1990 to 2004
DT 50 SM 2003 to 2004
Reference: MLR502R10
A small spring very convenient in case of loss or breakage. In addition it is treated not to oxidize. This spring can be put on the cartridge as well as the motor.
Reference: ABZ060R
A high-end stainless steel necklace for optimal support while maintaining a beautiful aesthetic piece.
Reference: BOQ810R
Ideal in case of breakage or wear for a repair cost while keeping are exhaust.
Reference: BSP810R
Complete hardware kit, ideal to refurbish your pot without change.
Reference: 15000867
Version 2017 88 / 94cc, exhaust BIDALOT RACING FACTORY low passage for YAMAHA DT, MBK X-limit, PEUGEOT XPS, ....
Reference: VCR-RD15188/RE
A homologated and powerful exhaust for the original engines, 50cc competition and 70cc entry-level.
Reference: H10539-Q
Very good upper passage pot on the left for various SM and EN DURO MOTORHISPANIA, PEUGEOT machines from 2006 to 2008.
Reference: CARR04
Low passage competition exhaust for machines with am6 engine.
Reference: EC07
A handmade exhaust in extra fine 8 - 10th grade jail, benefit from the experience of MVT 's racing service!
Reference: 061254116
An exhaust approved quality for mécaboite minarelli am6.
Reference: TUB807TB-25
A good quality pot with a top finish that will go very well with 50cc kits or even small 70cc kits. It is worked on the high and medium revs.
Reference: ESC-10
A high exhaust-end performance guarantees! Ideal with a kit configuration with 80, 88cc, 90cc special 45mm long race.
Reference: TUB810TB
A clean exhaust, well finished which will adapt the kit 50cc to 70cc way. The Special R2 for supermotard bike in am6 and engine derbi!
Reference: 487597
The famous DOPPLER GP8.0 low passage for 50cc motorcycles with MINARELLI AM6 engine.
Reference: 34623HF + 34626HF
A complete exhaust with silencer of your choice, model passage high, approved!
Reference: H10539
Very good upper passage pot on the left for various SM and EN DURO MOTORHISPANIA, PEUGEOT machines from 2006 to 2008.
Reference: H10533-Q
Very good upper passage pot on the left for various SM and EN DURO MOTORHISPANIA, PEUGEOT machines from 2008 to 2012.
Reference: ECHAP611VG
The high passage BIDALOT pot for your super-biker and enduro in minarelli am6 engine, silent, aesthetic and efficient in addition to being approved! Gunmetal silencer!
Reference: CARR10
Low pass racing muffler for machines with am6 engine.
Reference: EC12
A very good exhaust that can match very good 70/80cc kits.