Reference: EC12
Exhaust MVT S-RACE 70 - 80cc low passage for mécaboite minarelli am6 engine
A very good exhaust that can match very good 70/80cc kits.
Banner
Approved exhaust, authorized for public roads, open roads.
Here is the exhaust offered by VOCA called ROOKIE for your AM6.
This very light, very short but also very efficient low passage exhaust offers a unique and super racing look, its body is rolled welded in fine jail.
Its silencer is a brand new model with a black or red anodized aluminum casing of your choice and a flat tip with the laser-engraved VOCA logo.
It offers a really racing and melodious sound, for competition, it is enough to blow up the washer at the entry which clamps it and only holds on a welding point.
It will fit on your YAMAHA DT, BETA RR, RIEJU, ...... Or even on your sports cars with AM6 engine!
This pot is approved, however if a modification is made to obtain more performance, the approval is no longer valid such as removing the flange at its entry for example.
Mounts on :
Aprilia
MX 50cc (AM6)
RS 50cc (AM6) - (after 1999)
RS 50cc (AM6) - (before 1999)
RX 50cc (AM6)
Tuono 50cc (AM6)
AF1 50cc (AM6)
Beta
RR 50cc Motard (AM6)
RR Enduro 50cc (AM6) - (tubular)
RR Alu SM 50cc (AM6) - (perimeter)
RR Enduro 50cc (AM6)
RR Alu Enduro 50cc (AM6) - (perimeter)
RK6 50cc (AM6)
RR SM 50cc (AM6) - (tubular)
RR-T Enduro 50cc (AM6) - (tubular)
RR-T SM 50cc (AM6) - (tubular)
CH-Moto
WXE Enduro Racing 50cc (AM6)
WSM SM Racing 50cc (AM6-Euro 2)
Fantic Motor
SM 50 (Am6)
Caballero SM 50cc (AM6 alu)
Regolarita Casa 50cc (AM6 alu)
Generic
Trigger SM 50cc (AM6)
Trigger X-Enduro 50cc (AM6)
HM-Moto
Skid SM Competition (version 2006) AM6
Skid SM Competition (version 2005) AM6
Cre / Six SM 50cc (2006 version) AM6
Cre / Six SM 50cc (version 2005) AM6
Cre / Baja Enduro 50cc (2006 version) AM6
Husqvarna
SM Cross 50cc (AM6)
CH Racing 50cc (AM6)
MBK
X-Limit Enduro 50cc (after 2003) AM6 (perimeter)
X-Power 50cc (AM6) - (before 2003)
X-Power 50cc (AM6) - (after 2003)
X-Limit SM 50cc (before 2003) AM6 - (tubular)
X-Limit SM 50cc (after 2003) AM6 - (perimeter)
X-Limit Enduro 50cc (before 2003) AM6 - (tubular)
Malaguti
XTM Enduro 50cc (AM6) - (after 2003)
XSM Supermotard 50cc (AM6) - (after '03)
Drakon Naked 50cc (AM6)
Motorhispania
Furia Max Enduro / SM 50cc (AM6) - (tubular)
RX Super Racing 50cc (AM6)
RYZ Enduro / SM 50cc (AM6) - (perimeter)
Peugeot
XPS-Supermotard 50cc (AM6) - (perimeter)
XR6 50cc (AM6)
XP7 (AM6)
NK7 (AM6)
XR7 (AM6)
XPS-Street EVO2 50cc (AM6) - (perimeter)
XPS-Enduro 50cc (AM6) - (perimeter)
XP6-Supermotard 50cc (AM6) - (tubular)
XP6-Enduro 50cc (AM6) - (tubular)
Rieju
RS2 NKD 50cc (AM6)
MRT PRO SM (AM6)
Spike 2 50cc (AM6)
SMX SM 50cc Pro (AM6)
RS3 (AM6)
MRT SM (AM6)
MRT PRO (AM6)
RS-1 Evolution 50cc (AM6)
MRX Enduro 50cc Pro (AM6)
MRX Euduro 50cc (AM6)
RS2 Matrix 50cc (AM6)
SMX SM 50cc (AM6)
MRT (AM6)
RR Enduro 50cc (AM6)
Sherco
Enduro Shark 50cc (AM6)
SHARK 50cc Supermotard (AM6)
Supermotard Champion Replica 50cc (AM6)
Supermotard IPONE Replica 50cc (AM6)
Enduro 50cc (AM6)
Supermotard 50cc (AM6)
Yamaha
TZR 50cc (AM6) - (after 2003)
DTX SM 50cc (before 2003) AM6 - (tubular)
DTX SM 50cc (after 2003) AM6 - (perimeter)
TZR 50cc (AM6) - (before 2003)
DTR Enduro 50cc (before 2003) AM6 - (tubular)
DTR Enduro 50cc (after 2003) AM6 - (perimeter)
Reference: EC12
A very good exhaust that can match very good 70/80cc kits.
Reference: CARR06
Exhaust high performance! Created specifically for 50cc motorcycles with engine MINARELLI AM6 and 80cc kit (TZR, RS, XP6, XPS, XR6, RS1, MRT, ....)! Also arises on MINARELLI RV4!
Reference: CARR04
Low passage competition exhaust for machines with am6 engine.
Reference: 200.0422
Exhaust rolled / welded special high performance for the 100 POLINI kit on minarelli am6.
Reference: 34918
GIANNELLI silencer with connecting tube (for high passage) to the exhaust body for your APRILIA MX / RX 50 from 1995 to 1998.
Reference: ECHAP723CG
A very good pot with an exemplary finish, Gunmetal silencer and chrome body!
Reference: TUB810TB
A clean exhaust, well finished which will adapt the kit 50cc to 70cc way. The Special R2 for supermotard bike in am6 and engine derbi!
Reference: TUB808TB
A pot really well designed on the origin or the small and medium configuration. The finish is really very clean with a fine jail.
Reference: 155811
A VOCA approved and efficient exhaust for the original engines, 50cc competition and 70cc entry range.
Reference: EC20
A handmade exhaust in extra fine 8 - 10th grade jail, benefit from the experience of MVT 's racing service!
Reference: ESC-10
A high exhaust-end performance guarantees! Ideal with a kit configuration with 80, 88cc, 90cc special 45mm long race.
Reference: 15000869
Version 2019 88cc / 94cc, exhaust BIDALOT RACING FACTORY low passage for YAMAHA DT, MBK X-limit, PEUGEOT XPS, ....
Reference: ESC-04
A high exhaust-end performance guarantees! Ideal with a configuration with 70cc.
Reference: 3212670
The replica of the famous MALOSSI MHR SUPERMOTO, a beautiful and powerful pot in addition to being approved!
Reference: ECHAP721VG
One of the best low passage for ENDURO and 50cc SUPER-MOTARD home MBK, YAMAHA, PEUGEOT, MALAGUTI, excellent reputation, good performance and a great design for this RACING coated version!
Reference: VCR-RD25188/RE
An approved and efficient muffler for original engines, 50cc competition and 70cc entry-level.