Reference: VCR-RD15192/RE
Exhaust VOCA CHROMED low passage for motorcycle 50cc DERBI silent choices
A homologated and powerful exhaust for the original engines, 50cc competition and 70cc entry-level.
Banner
Not homologated on the road, only reserved for competition.
Here is a very large exhaust! The new 2017 version is one of the best for very large configurations. This exhaust is created for all cylinders, kits, high engines in displacements from 75 to 85cc, it will also be able to work very hard on maxi kits approaching the performance of BIDALOT 80/85cc packs, especially long races with large cylinders. diagrams.
This exhaust is delivered complete, with all the necessary mounting for each machine, with a very neat mounting on silentbloc, the mounting brackets are all adjustable. Aesthetic level and noise is huge and indescribable, you have to test it to understand the BIDALOT racing magic. The pot being very thin (8/10), the resonance is at the top, the high revs too, you really have to put this exhaust on over-boosted and well-tuned engines.
Technically, this escapement is made as follows:
- AP04 steel sheet 8/10th mm thick, laser cut
- Unit rolling of each cone manually
- Unitary welding of the seam of each cone by TIG welding
- Installation of each cone and pointing by TIG welding
- Welding of the pot by oxy-acethylene
- Each solder is tapped, so as not to have a bead of solder inside the pot
Finally, this exhaust has fairly substantial and unusual dimensions, which really makes it an XXL model, suitable for larger displacements. As always, BIDALOT has worked on a wide range of revs, which ensures high torque from low revs, while maintaining outstanding performance ''at the top''.
These various artifices allow this pot to have an excellent power of acceleration, without however compromising the extension and the high revs! To conclude, the perfection of the exhaust for over-boosted minarelli am6 mécaboite engine has a name: BIDALOT RACING FACTORY.
This exhaust is already raging on meetings, competitions, runs, it is at the top at all levels, it will just be necessary to install it with the appropriate configuration and the necessary knowledge in terms of mechanics, engine settings... With a very large configuration this exhaust will be able to develop enormous torque, an inexplicable recovery and breathtaking high revs.
The finishes are of course also at the top with a matte varnish, very clean welds, each part is treated as it should be, the silencer is in titanium gray aluminum.
This model mounts on:
-All DERBI euro 2 or 3 engine with perimeter frame
-DERBI SM (super biker)
-DERBI enduro (cross)
-DERBI DRD
-DERBI X-TREM
-DERBI X-RACE
-DERBI GPR
-APRILIA RX, SX... DERBI engine
-APRILIA RS, RS4... DERBI engine
- GILERA SMT and others
And other models….
Reference: VCR-RD15192/RE
A homologated and powerful exhaust for the original engines, 50cc competition and 70cc entry-level.
Reference: VCR-RD36192/RE
A homologated and efficient exhaust for the original engines, 50cc competition and entry-level 70cc.
Reference: VCR-RD25192-RE
An approved and efficient muffler for original engines, 50cc competition and 70cc entry level.
Reference: 15000877
Version 2015 88 / 94cc, exhaust BIDALOT FACTORY RACING for DERBI SENDA, SM, ENDURO, X-TREM, GPR ...!
Reference: 479481
A superb art traveling for derbi sm and enduro.
Reference: TUB233_DECLI
A bit of very good quality, with a good sound that will bring a gain in performance and weight on your original DERBI or 50cc racing.
Reference: 483364
A muffler original type flanged, to put behind your 50cc motorcycle cheap compared to orgine concession!
Reference: TUB810TB
A clean exhaust, well finished which will adapt the kit 50cc to 70cc way. The Special R2 for supermotard bike in am6 and engine derbi!
Reference: TUB230TB
A very good approved pot that will give very good performance accompanied by a kit 50cc or origin.
Reference: CARR05
Low passage competition exhaust for machines with am6 engine.
Reference: 3211982
An exhaust created for competition which will adapt very well to the largest engines such as the MHR team, BIDALOT Racing, ... For us one of the best exhaust on the market!
Reference: 33652HF + 33654HF
A complete exhaust with silencer choices, model passage low, approved!
Reference: 061253016
This is a very well worked pot, entirely hand made for welds and a clean finish. This pot will fit very well on the 50cc kit like the 70cc.
Reference: 15000377
Version 2015 80/85cc, BIDALOT RACING FACTORY exhaust for DERBI SENDA, SM, ENDURO, X-TREM, GPR...!
Reference: ESC-24
A very high-end line with a very good finish for the DERBI SENDA, DRD, X RACE, X-TREM, APRILIA RX, GILERA RCR .. 80/90 cc!
Reference: ECHAP610VG
A very well worked pot with excellent finishes, ideal for small kits 50cc or 70cc. Gunmetal silent.