Reference: MLR502R10
Exhaust muffler spring treated YASUNI long model (70mm)
A small spring very convenient in case of loss or breakage. In addition it is treated not to oxidize. This spring can be put on the cartridge as well as the motor.
Banner
Here is the YASUNI Cross pot for DERBI SENDA, X-TREM, X-RACE, DRD, APRILIA RX, SX from 2006, GILERA SMT, RCR and BULTACO. This exhaust will bring to your motorcycle additional performances but also a look and a lightening.
The body of the exhaust is completely empty and fine baule for better resonance, volume, cones and cones are well studied. At choice, black or aluminum silencer.
A very good exhaust, approved and delivered with its certificate of approval. Delivered so bridled, in case of unclamping (remove the washer at the entrance) it is no longer approved for the road but reserved for competition.
Mounts on :
Derbi Senda
Derbi Senda R
Derbi Senda R 2000
Derbi Supermotard
Derbi Supermotard 2000
Bultaco Astro
Bultaco Lobito
Derbi DRD Racing
Derbi X-Race
Derbi X-Treme R (Off-Road, Super-Biker)
APRILIA RX and SX after 2006
GILERA SMT, RCR ...
Reference: MLR502R10
A small spring very convenient in case of loss or breakage. In addition it is treated not to oxidize. This spring can be put on the cartridge as well as the motor.
Reference: SBL601R
A rubber mount that can absorbed the engine vibrations. It is of very good quality, not to be overlooked when worn.
Reference: ABZ060R
A high-end stainless steel necklace for optimal support while maintaining a beautiful aesthetic piece.
Reference: 3212613
The must of all exhausts. Specially created for competition, ideal on a large powerful kit.
Reference: 3212793
One of the best pot-approved market. It is steel sheet thickness of 1mm to prevent vibrations while maintaining a very low weight.
Reference: ESC-24
A very high-end line with a very good finish for the DERBI SENDA, DRD, X RACE, X-TREM, APRILIA RX, GILERA RCR .. 80/90 cc!
Reference: TUB230TB
A very good approved pot that will give very good performance accompanied by a kit 50cc or origin.
Reference: 3286
After the success of the famous LEOVINCE V6 here is the next generation with the pot X-FIGHT even more torque on the original cylinders or other 50cc.
Reference: 483364
A muffler original type flanged, to put behind your 50cc motorcycle cheap compared to orgine concession!
Reference: H10537-Q
A very powerful exhaust! Racing model from TURBOKIT with chrome-plated body and silent carbon, the top on a big configuration.
Reference: 061253016
This is a very well worked pot, entirely hand made for welds and a clean finish. This pot will fit very well on the 50cc kit like the 70cc.
Reference: 061685117
A very well studied pot, especially at high speeds. It will fit very well on 50cc racing kit or small 70cc kit.
Reference: H10504-Q
A very efficient exhaust pipe! Racing model from TURBOKIT with chrome hardened body and carbon silencer, the top on a big configuration.
Reference: 34648HF + 34649HF
The new GIANNELLI is really sublime! A high-rolled welded and super fashion for your DERBI!
Reference: 3211982
An exhaust created for competition which will adapt very well to the largest engines such as the MHR team, BIDALOT Racing, ... For us one of the best exhaust on the market!
Reference: 33646HF + 33647HF
A complete exhaust with silencer choices, model central passage under saddle, approved!
Reference: 3228
After the success of the famous LEOVINCE V6, here are the notes with version X-FIGHT for even more torque on the origins of cylinders or other 50cc.
Reference: TUB233_DECLI
A bit of very good quality, with a good sound that will bring a gain in performance and weight on your original DERBI or 50cc racing.
Reference: 3212668
A high-end exhaust, with extensive studies to have a powerful exhaust while remaining approved.