Reference: 5491
BUZZETTI universal puller 2 screws 5mm thread center distance 30 to 52mm
A universal puller recommended for SUZUKI, MINARELLI, MORINI but also for all internal rotor ignitions.
Banner
The must of internal rotor ignitions which in addition to having a very strong spark and no engine rev limit you can modify the curves just by changing the electronic chip, arises on 150, 155, 160cc 4T engines
Attention, this ignition does not have power supply for the headlights or others, it is in no way approved or authorized on the road.
*Since 2022, delivered in double curve with a specific switch!
Here is the ITALKIT ignition by SELETTRA DIGITAL, this ignition is a real concentrate of technology and offers extraordinary performance, it has an internal rotor, great ignition power, excellent balancing to avoid vibration, but also and above all variable advance with, in addition, a specific box that can be changed to replace the chip (4 chips available on the market). The chip delivered is the ITALKIT CURVA 2 chip (curve 2), there are also 1, 3 and 4 which offer a different variation, more or less advanced. This ignition is very high-end, the rotor / stator group is made at SELLETTRA, of very good quality and used by many brands in competition. Admittedly expensive SELLETTRA ignitions are well known to connoisseurs of competition performance. This ignition offers great reliability and stability even in the highest revs. For its system, ITALKIT has obviously selected a high voltage coil separated from the case, an aluminum plate machined in the best metals, this ignition being very complete, ITALKIT even provides you with a luxury copper ground braid as well as the high voltage cable to accompany a competition resistive suppressor and a good track spark plug. This ignition is clearly recommended for the track, the competition, the runs... On the engines which deserve it and need it! In any case, you won't go wrong by selecting this modular, powerful and stable ignition!
Tip for timing : This ignition, like the premium MVT for example, is easily stalled! You must put the piston at TDC (high engine point) exactly at 0° therefore, and put the green line of the rotor opposite the line of the stator, you can of course try to vary this setting according to your configuration, never exceed +1mm / -1mm via the setting pin.
Mounts on all engines :
IMR Corse SM 155 2014
IMR Corsica SM 155RR 2014
IMR Supercorse 160RR 2014
Monster Pro CR007 Biker Z160
Monster Pro M2 - Z160
Monster Pro M4 - Z160
Monster Pro M5 - Z160
RAV MiniGp 160
RAV Naked 160
Rebel Master Minimotard 160cc
Rebel Master Pole 160cc
Rebel Master Rebel Master POLE 160cc
Rebel Master Rebel Master SP 150R
UNO Racing 150 Supermoto
VOCA Racing HAWK 160
VOCA Racing HAWK 160 Gold-Version
VOCA Racing HAWK 160 Replica
Reference: 5491
A universal puller recommended for SUZUKI, MINARELLI, MORINI but also for all internal rotor ignitions.
Reference: ES.001
PARMAKIT spare stator for your PARMAKIT ignition!
Reference: EVB.1
High quality and guaranteed performance ignition coil SELETTRA ITALKIT for digital ignition with variable advance on moped, scooter and mécaboite.
Reference: EVE.3
Indispensable to repair the ignition grill or to increase the performance of your engine, ITALKIT CURVA chip for ignitions ITALKIT by SELETRA DIGITAL all scooter models, mécaboite or moped.