Reference: 168917
BLUESTAR Silicones CAF 4 white joint paste 100 grams
A top-of-the-range, quick-setting sealant for maximum resistance and tightness.
Banner
Here is a very good pack of the house ATHENA Racing, a kit of very high quality sheets for joints with its pipe joint joint very famous in the world of the motorcycle competition LOCTITE gray.
The pack consists of :
-1 sheet of 21x30 cm of cylinder head gasket and other Victor reinz type AFM22 1,20mm
-1 sheet of 21x30 cm of paper with cylinder head gasket and other Victor reinz type AFM22 1,00mm
-1 sheet of 21x30 cm paper seal (treated waterproof and smoothing, not recommended for cylinder head) CENTELLEN Hecker 3820 0,60mm
-1 sheet of 21x30 cm paper joint (not recommended for cylinder head) Flexoid 0.50mm
-1 sheet of 21x30 cm paper joint (not recommended for cylinder head) Flexoid 0.35mm
-1 sheet of 21x30 cm paper joint (not recommended for cylinder head) Flexoid 0,20mm
-1 tube of 80ml of gray LOCTITE with folder, cap and measuring cap. Resistance from -70 ° C to + 200 ° C.
Reference: 168917
A top-of-the-range, quick-setting sealant for maximum resistance and tightness.
Reference: 3450
A very well studied paste for filling or repairing your metal, aluminum, ceramic, wood and even plastic parts.
Reference: 156190
A standard 0.50mm joint board + BA55 0.5mm cardboard joint
Reference: 183249
A material addition paste used by our team for great preparation. The quality is present. Practicality too!
Reference: VKM00040
Artein cutting joint sheets
Reference: 2374
A low viscosity paste which will allow you a perfect sealing of your engine. This paw is often used by professionals.
Reference: 3479
Large quantity of 500 grams. A professional product, high quality sticks very well, it is flexible and takes well to heat.
Reference: 152110
Kit of four 150°C paper seal sheets, different thicknesses included.
Reference: 156189
Two standard joint boards in 0.25 and 0.50mm + BA55 0.3mm cardboard joint + steel reinforced joint in 1mm
Reference: 440924
Cutting sheets to cut yourself ARTEIN 0.8 and 1.2 mm, ideal for the manufacture of cylinder head or exhaust!
Reference: 5910
A top-of-the-range joint compound for maximum resistance and tightness. This paste resists from -55 ° to 250 ° C without problem.
Reference: SI 5660
A top-of-the-range joint compound for maximum strength and tightness. This paste resists from -55 ° to 250 ° C without problem.
Reference: 036.164
Elastic joint paste resistant to high temperatures. (300 ° C)
Reference: 171800
Ideal for safe and leak-free mounting of your exhaust.
Reference: 152111
Ideal for creating your own engine gasket, carburetor and many other uses.