Ø47mm cylinder head for kit 70cc AIRSAL Luxury bi-cast segments on DERBI euro 1 & 2

Culasse Ø50mm for kit BARIKIT 80cc divides into two on DERBI euro 1 & 2

Quick view

Reference: CUL-779

Ø50mm cylinder head for kit 80cc two-segment BARIKIT on DERBI euro 1 & 2

Monobloc cylinder head replacement for the high engine 80cc 50mm BARIKIT.

€45.83

Shipping in 7 to 12 days depending on arrivals BARIKIT

More

Shipping in 7 to 12 days depending on arrivals BARIKIT

Quick view

Reference: CU.12.85

ITALKIT cylinder head for kit 80cc ITALKIT aluminum DERBI euro 1, 2, 3 & 4

The replacement stud cylinder head for the 80cc ITALKIT aluminum kits DERBI euro 1, 2, 3 & 4.

€66.66

Attention requires a delay of more than 20 days

More

Attention requires a delay of more than 20 days

Ø50mm cylinder head for AIRSAL XTREM 80cc mono-segment kit on DERBI euro 1 and 2 engine

Quick view

Reference: 04089950

Ø50mm cylinder head for kit AIRSAL XTREM mono-segment 80cc on DERBI euro 1 & 2

A single high compression cylinder head for kit 80cc Ø50mm aluminum AIRSAL. Ideal in case of breakage, crack or heater that just do the bolt will no longer be flat so a premature wear of the joints.

€28.33

Shipping in 1-3 days.

More

Shipping in 1-3 days.

Complete stud cylinder head for kit PARMAKIT 80cc Ø50mm stroke 40mm on DERBI euro 1 & 2

Quick view

Reference: 23156.04

Cylinder head complete for kit PARMAKIT 80cc Ø50mm stroke 40mm on DERBI euro 1 & 2

Ideal in case of breakage or wear of your old cylinder head! Model with top stud for kit 80cc race 40mm PARMAKIT.

€90.83

Shipping in 5 to 10 days!

More

Shipping in 5 to 10 days!

-50% Promo

Ø50mm cylinder head for kit BARIKIT and BRK 88cc race 45mm on DERBI euro 1 & 2

Quick view

Reference: CUL-918

Ø50mm cylinder head for kit and BARIKIT BRK 88cc race 45mm DERBI euro 1 & 2

Cylinder head complete replacement of two parts, special for the top motor 45mm stroke 50cc 88cc diameter.

€37.91 €75.83

Shipping in 7 to 12 days depending on BARIKIT factory arrivals

More

Shipping in 7 to 12 days depending on BARIKIT factory arrivals

culasse Ø50mm pour kit MALOSSI et MHR replica 80cc sur DERBI euro 1 et 2

Quick view

Reference: 3811696

Ø50mm cylinder head for kit MALOSSI and MHR replica 80cc on DERBI euro 1 and 2

A cylinder head with a top finish for the MALOSSI Replica kit.

€49.99

Attention, may require a delay of more than 20 days

More

Attention, may require a delay of more than 20 days

Complete cylinder head stud kit for Ø47,6mm and pack ITALKIT 80cc Racing aluminum Long Stroke 43 DERBI euro 1 & 2

Quick view

Reference: CU.12.78

Complete breech block Ø47,6mm for 80cc kit and pack ITALKIT Racing aluminum long stroke 43 on DERBI euro 1 & 2

Stud bolt (decomposable two parts) complete replacement, special for the top motor racing 43 mm, 80cc on Derbi euro 1 & 2.

€78.33

Attention, requires a period of more than 20 days!

More

Attention, requires a period of more than 20 days!

Complete stud cylinder head for kit PARMAKIT 110cc Ø55mm stroke 40mm on DERBI euro 1 & 2

Quick view

Reference: 23162.04

Complete stud cylinder head for kit PARMAKIT 95cc and 110cc Ø55mm stroke 40mm on DERBI euro 1 & 2

Ideal in case of breakage or wear of your old cylinder head! Top-of-the-range stud model for PARMAKIT 90 to 110cc kit.

€91.66

Shipping in 5 to 10 days!

More

Shipping in 5 to 10 days!

Cylinder head cover for ATHENA Racing 50/70cc kit on DERBI euro 1 & 2 engine

Quick view

Reference: S410105308001

Head cover for ATHENA Racing 50 / 70cc kit on DERBI euro 1 & 2 engine

Ideal replacement in case of breakage or advanced wear of your old room.

€41.66

Shipping in 1-3 days

More

Shipping in 1-3 days

Cylinder head cover for all MALOSSI MHR TEAM / CROSS and BIG BORE kits

Quick view

Reference: 38 9513

Head cover for all kits MALOSSI MHR TEAM / CROSS and BIG BORE

For stud head only, covers aluminum cylinder head essential to replace your old piece out of use.

€54.16

Shipping in 1-3 days

More

Shipping in 1-3 days

Ø47mm bolt for BARIKIT Racing 70cc kit bi-cast segment on DERBI euro 1 & 2

Quick view

Reference: CUL-739

Ø47mm cylinder head for kit cast BARIKIT Racing 70cc two-segment on DERBI euro 1 & 2

High compression cylinder head replacement for the high engine 70cc 47mm diameter cast iron BARIKIT Racing on DERBI euro 1 and 2.

€50.83

Shipping in 7 to 12 days depending on arrivals BARIKIT

More

Shipping in 7 to 12 days depending on arrivals BARIKIT

Ø50mm cylinder head for AIRSAL Luxe 88cc Xtrem red kit on DERBI euro 1 & 2 engine

Quick view

Reference: 04087650

Ø50mm cylinder head for kit 88cc Luxe AIRSAL on Xtrem red DERBI euro 1 & 2

The replacement head for your kits AIRSAL XTREM on your bike DERBI euro 1 & 2!

€28.33

Shipping in 20 to 90 days depending on factory arrivals.

More

Shipping in 20 to 90 days depending on factory arrivals.

Cylinder head complete Ø47,6mm for kit and pack 80cc ITALKIT Racing aluminum long race 44.90 on DERBI euro 1 & 2

Quick view

Reference: CU.12.81

Complete breech block Ø47,6mm for 80cc kit and pack ITALKIT Racing aluminum long race 44,90 on DERBI euro 1 & 2

Stud bolt (decomposable two parts) complete replacement, special for the top motor racing 44.90mm, 80cc on Derbi euro 1 & 2.

€78.33

Attention, requires a period of more than 20 days!

More

Attention, requires a period of more than 20 days!

-30% Promo

Ø48mm cylinder head for AIRSAL 70cc mono-segment kit on DERBI euro 1 & 2 engine

Quick view

Reference: 04081548

Ø48mm cylinder head for kit 70cc mono-segment AIRSAL on DERBI euro 1 & 2

The cylinder head replacement kit for AIRSAL 48mm, 70cc on DERBI euro 1 & 2!

€20.41 €29.16

Shipping in 1-3 days.

More

Shipping in 1-3 days.

BIDALOT cylinder head cover for RACING FACTORY kits on Minarelli am6 and DERBI euro 1, 2 & 3

Quick view

Reference: 11220870

BIDALOT cylinder head cover for RACING FACTORY kits on Minarelli am6 and DERBI euro 1, 2, 3 & 4

Ideal to give a racing look to your engine or wear!

€94.16

Variable delay according to BIDALOT factory! May need more than 20 days!

More

Variable delay according to BIDALOT factory! May need more than 20 days!

ITALKIT Ø47mm high compression cylinder head for motorcycle DERBI FENIX, FDS, FDT, SAVA NNAH ... 50cc

Quick view

Reference: CU.12.06

Cylinder head high compression ITALKIT Ø47mm Motorcycle DERBI FENIX, FDS, FDT, SAVANNAH 50cc ...

Cylinder head of replacement for high engine 70cc 47mm diameter. High compression quality aluminum model.

€40.83

Shipping in 1-3 days

More

Shipping in 1-3 days