Reference: VM.60.1
Set of 4 ITALKIT reinforced clutch springs for minarelli am6
Quality springs for your minarelli am6 equipped engines.
Banner
Not approved on road open only for competition on the track, road closed.
A novelty of the great Spanish brand ITALKIT and finally available to us, the competition has better behave themselves. This very complete pack 80cc engine mounts on mécaboite Minarelli AM6 is the top engine used to pack racing 80cc. This set will give you all the power sought to distinguish yourself in competition and win the first place. To accompany the ITALKIT crankshaft bearings celeron 44.00 race rod 90mm and only for this purpose which will improve considerably engine movement . combined race 44, the actual displacement is 79,58cc.
The cylinder is made of aluminum alloy and has a specific heat treatment and internal coating niquel / silica, giving it its strength and reliability. With no less than 9 lights including 6 transfers of admission, 2 boosters worked to shape and finally the impressive exhaust outlet by its shape and size to the point where the output was revised upwards diameter and measure no less than Ø32mm (an exhaust ring is provided for passage a Ø28mm diameter exhaust).
In addition, the cooling also been completely revised and corrected in order to provide the best possible heat exchange and at the same time to get a performance gain consequently indeed less engine runs out of steam and heat and more performance remain present. to accompany this cylinder, a racing stud bolt! Top model, specially designed to provide maximum compression. The breech block is used and mounted on O-ring, the combustion chamber is frustoconical in shape and has a very successful polished, smooth and clean.
The Ø48mm piston meanwhile is not chosen at random, it is a single segment model in VERTEX with graphite treatment with a specific size and cap to be fitted with 90mm rod. Suffice to say the material of the highest quality whose reputation / quality is second to none. The piston is equipped with a chrome finish 1mm thick segment thus promoting revving. With graphite processing, forms and composition, this piston was very well designed and studied in order to offer a better thermal expansion , agreeing at the same time perfectly with this cylinder to support the free times, brutal regime change and prolonged endurance of circuit.
Clearly, this racing kit 80cc Ø48mm for your Minarelli AM6 engine will be a major asset to offer you guaranteed victories and thrills! Delivered complete as presented, you can rely on photographs, they are binding as we usually do.
We recommend to accompany this pack with minimum: a carburetor 28, an intake kit flexible mounting, crankshaft ultra reinforced ITALKIT Competition Race 44 / 90mm rod, Selettra ignition with variable advance in ITALKIT cold NGK B105EGV compulsory motor racing oil, relaxing racing exhaust large volumes needed ....
contains:
Master cylinder Ø48mm aluminum 6 transfers with large exhaust boost
-piston VERTEX graphite mono segment Ø48mm
Aluminum cylinder head of -Couvercle
-Plot High compression cylinder head, the incoming type of tapered shape, polished finish
-Segment End Ø48 chromed 1mm thick
Axis-reinforced piston Ø12 X 37mm
-Clips Piston type G
-pack Motor attached with several joints of base plate of different thicknesses
X1 cylinder head for centering Pion
-Bague Exhaust Ø32 to 28mm reduction
-Installation instructions
-Autocollant
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
This high engine fits the 50cc motorcycles following gearbox fitted the engine MINARELLI AM3, AM4, AM5, AM6 euro 1 am6 euro 2:
-APRILIA RS AM6 engine from 1997 to 2006 (after 2006, attention to motor past DERBI euro 3)
-APRILIA RX engine AM6 (after 2006, attention to motor past DERBI euro 3)
-APRILIA MX engine AM6 (after 2006, attention to motor past DERBI euro 3)
-Beta CRE
RR -Beta
-Beta RR ALU
-Honda HM
-Honda CRE
-Honda BAJA
-HUSQUVARNA WXE
-HUSQUVARNA CH
-HM DERAPAGE
-HM CRE
-MALAGUTI DRAKON
-MALAGUTI XTM
-MALAGUTI XSM
-FANTIC CABALLERO
-PEUGEOT XP6
-PEUGEOT XPS
-PEUGEOT XP STREET
-PEUGEOT XP STREET EVO
-PEUGEOT XR6
-PEUGEOT XR7
-MOTORHISPANIA RYZ
-MOTORHISPANIA RX-R
-MOTORHISPANIA RX
-RIEJU RS1
RS2 -RIEJU
-RIEJU RS2 MATRIX
-RIEJU RS2 MATRIX PRO
SMX -RIEJU
-RIEJU MRX
-RIEJU SPIKE
-KEEWAY TX EN
-YAMAHA DT
-MBK X-LIMIT
-YAMAHA TZR
-MBK X-POWER
SM -SHERCO
-SHERCO ENDURO
-SHERCO HRD
-SHERCO ENDURO
And many other machines!
Reference: VM.60.1
Quality springs for your minarelli am6 equipped engines.
Reference: 6204 TB.P63
A bearing that will support all your most advanced configurations. Real competition piece!
Reference: SE.480.10.I
High quality segment, ideal for the maintenance of your high engine ITALKIT 75 and 80cc kit in diameter 48mm.
Reference: RST.222
A special competition needle cage, silver treated from ITALKIT in Ø12X17X15mm.
Reference: VJ.44.48
Replacement seals for the maintenance of your high engine 80cc Ø48mm in 44mm ITALKIT stroke on Minarelli AM6.
Reference: CU.44.82
Complete replacement cylinder head (decomposable two parts), special for the high engine in 44.00 stroke, diameter 48mm 80cc.
Reference: CU.44.50.2
Ideal in case of breakage or sheer for a refurbishment of your top big engine displacement on minarelli am6.
Reference: CU.44.80.3
Ideal in case of breakage or wear, high quality cylinder head stud, model entering ITALKIT Competition for pack and 80cc kit Ø48 mm 44.00 mm long race minarelli am6.
Reference: K.44.849.GR2
Genuine 100% full competition pack for minarelli am6! Special race 44 and 90mm rod with ultra strengthened vilo, 80cc kit Ø48mm 32mm exhaust, Celerons bearings, clutch springs, .... A pack perfectly designed to be assembled together for maximum performance!
Reference: PI.44.480A.V
Piston mono segment complete spare graphite, top model home VERTEX for kit high 75 and 80cc with 90mm rod on am6.
Reference: CB.44.90.R
Mazzuchelli top-of-the-range 44.00mm long stroke special crankshaft, 90mm machined forged connecting rod for improved motor movement, ... with silver treated needle cage and celeron bearings.
Reference: CI.44.849.GR2
Cylinder / piston without cylinder head replacement kit 80cc Ø48mm, 6 transfers, large 32mm exhaust .... To accompany a 44,00mm long stroke crankshaft with 90mm rod and only its head high compression pad.