- New
Reference: 478511
Side stand IGM mécaboite 50cc DERBI SENDA
In case of crack, break or if your stand is twisted here a solid stand for DERBI SENDA.
Banner
Much more than a simple crutch or a standard motorcycle lift, here is a mechanical screw lift from P2R !
Able to support a load of up to 500 Kg, in other words, you can lift any small or large displacement.
You will be able to fix this tool to the ground thanks to the 2 plates on each side of the bridge, in order to optimize the ground clearance of your motorcycle when lifting it and above all additional safety during your mechanical sessions.
Its minimum height is 90mm (bridge lowered to the max.) and its maximum height is 405mm (reaching 500mm with supports). The lifting platform is flat and long enough to provide you with multiple uses.
This platform is equipped with two removable guides in order to be able to put machines with swing arm on it without any problems. Its guides are themselves equipped with locking screws to guarantee even more safety when lifting and maintaining the machine.
Lifting is therefore done manually using an axis and a pipe wrench (same principle as a bench vice for use, just turn in one direction to raise and the opposite to lower) . Delivered 100% complete as presented. As you will have understood, this quality tool is robust and ultra practical in a garage thanks to its wide variety of settings in terms of both width and height, as well as the weight supported...
Features :
- Table adjustable in height to reach 500 mm with supports.
- Fixed platform 15x 45 cm.
- 2 sliding supports provided
Reference: 478511
In case of crack, break or if your stand is twisted here a solid stand for DERBI SENDA.
Reference: 478515
If crack, break or if your leg twists here is a solid crutch for RIEJU RR 50cc.
Reference: 2B004529000XNL
Replacement side stand for your mécaboite 50cc!
Reference: 490326
In case of crack, breaks or if your crutch is twisted here is a solid crutch for RIEJU MRT 50cc.
Reference: 757086
Excellent for a refurbishment and original of your machine.
Reference: 758990
A much stronger stand as adaptable to an admittedly expensive price but with a good quality present.
Reference: 11010169
In case of crack, breakage or if your crutch is twisted, here is a solid crutch for DERBI DRD RACING R 50cc.
Reference: 478516
In case of crack, breaks or if your crutch is twisted here is a solid crutch for MBK X-LIMIT and YAMAHA DT.
Reference: 492320
In case of crack, breakage or if your crutch is twisted, here is a solid crutch for BETA RR 50cc.
Reference: 497072
In case of crack, breaks or if your crutch is twisted here is a solid crutch for RIEJU SMX, RRX, MRX 50cc.
Reference: 800786
A much stronger stand as adaptable to an admittedly expensive price but with a good quality present.
Reference: 139018
A lever support to hold your 2 wheels on all occasions.
Reference: 162909
Motorcycle bridge, a practical and essential tool for all mechanics looking for quality equipment. Supports up to 500 Kg and adjustable in height!
Reference: 502720
In case of crack, breaks or if your crutch is twisted here is the original crutch DERBI solid for DERBI XTREM from 2018.
Reference: 0940
A tool that allows you to adjust the most of your transmission, or lubricate your chain or other.
Reference: 486794
A universal support to maintain your 2 wheels for all occasions.