Reference: 2959
Ø94mm CHARVIN hub crown for MBK 41 / 51 rims, choice of teeth width 415, 11 fixing holes
Crown Made in France CHARVIN for your MBK 41 & 51 rims, 3 sizes available! Models with 11 fixing holes in diameter 94mm.
Banner
Here are the crowns with Ø94mm hub hole from CHARVIN Industrie for Peugeot 103 with spoked rims. With a wide choice ranging from 42 to 56 teeth, you will be able to fine-tune your transmission settings. A large crown will allow you to obtain more acceleration (also take into account the variation / clutch part) while a smaller crown will give you an increase in speed to the detriment of acceleration / recovery!
It's up to you to find the right compromise according to your configuration. It is strongly recommended to change its chain and its pinion to start again on a new transmission without problems. A crown of excellent quality Made in France with a treated and machined steel alloy. An element intended to last over time, do not forget to lubricate your chain well to avoid friction between the pinion / chain / crown (to reduce heating, wear, play, etc.). Model 11 fixing holes in width 415.
Be careful to select the number of teeth before adding to the basket.
Reference: 2959
Crown Made in France CHARVIN for your MBK 41 & 51 rims, 3 sizes available! Models with 11 fixing holes in diameter 94mm.
Reference: D525.30
Crown to be machined, in aluminium, available from 30 to 60 teeth! For 525 chain.
Reference: D520.31
Crown to be machined, in aluminium, available from 30 to 60 teeth! For 520 chain.
Reference: 2962
Courrone Made in France CHARVIN for your MBK 65/68/85/88 and 89 rims, from 44 to 54 teeth available with 6 fixing holes.
Reference: 2940
Courrone Made in France CHARVIN for your PEUGEOT 103 rims with steel sticks, from 43 to 56 teeth available! Models with 10 fixing holes.
Reference: A415.29
Universal crown to drill/machine at your convenience.
Reference: 2970
The CHARVIN Industries Made in France courrone for your MBK 51 S rims, from 42 to 60 teeth available with 10 fixing holes.
Reference: D428.30
Crown to be machined, in aluminium, available from 29 to 78 teeth! For 428 chain.
Reference: D420.30
Crown to be machined, in aluminium, available from 29 to 78 teeth! For 420 chain.
Reference: 2947
Courrone Made in France CHARVIN for your PEUGEOT 103 GRIMECA rims, from 40 to 60 teeth available with 10 fixing holes.
Reference: D530.30
Crown to be machined, in aluminium, available from 30 to 70 teeth! For 530 chain.
Reference: 512881
Crown that mounts on your DOPPLER or FRANCE EQUIPEMENT crown holder.
Reference: 2957
Courrone Made in France CHARVIN for your MBK 40 & 50 rims, 3 sizes available! Models with 10 fixing holes.