- -8%
Reference: 6616783b
Hyper reinforced MALOSSI needle cage Ø10X14X13mm scooter MINARELLI, KEEWAY, CPI, ...
An ultra reinforced needle cage that will allow you to install all the engines on the market without risk of breakage.
Banner
Here is one of the best quality / price ratio of the market and especially the most high end of the market! The crankshaft MALOSSI MHR RHQ SPORT is a reinforced model, balanced and in full masses that can easily take 16 000 trs, it is really intended for reinforcement of the low engine and the performance, it is certainly the most studied crankshaft of the market.
This beautiful crankshaft will be delivered with a complete rod of 80 and a needle cage Ø 10x14x13 (if you get for the Ø10 of course) otherwise it will be delivered in Ø12x17x16
All components of this vilo are subjected to at least 5 heat treatments.
Mounts on :
APRILIA APRILIA SR 50 2T 1994->
APRILIA APRILIA AREA 51 50 2T LC
APRILIA APRILIA GULLIVER 50 2T LC
APRILIA APRILIA GULLIVER 50 2T
APRILIA APRILIA RALLY 50 2T (MINARELLI)
APRILIA APRILIA SR NETSCAPER 50 2T LC (MINARELLI)
APRILIA APRILIA RALLY 50 2T LC (MINARELLI)
APRILIA APRILIA SCARABEO 50 2T (MINARELLI)
APRILIA APRILIA SR RACING 50 2T LC (MINARELLI)
APRILIA APRILIA SONIC 50 2T
APRILIA APRILIA SONIC 50 2T LC
APRILIA APRILIA SR REPLICA 50 2T LC <-1999
APRILIA APRILIA SR STEALTH 50 2T LC (MINARELLI)
APRILIA APRILIA SR WWW 50 2T
AEON MOTOR AEON MOTOR COBRA 50 2T (AT70)
ATALA ATALA CAROSELLO 50 2T
BETA BETA ARK 50 2T
BETA BETA ARK 50 2T LC
BETA BETA CHRONO 50 2T
BETA BETA EIKON 50 2T LC
BETA BETA QUADRA 50 2T
BETA BETA TEMPO 50 2T
BENELLI BENELLI 491 SPORT 50 2T LC (MINARELLI)
BENELLI BENELLI 491 GT 50 2T (MINARELLI)
BENELLI BENELLI K2 50 2T
BENELLI BENELLI K2 50 2T LC
BENELLI BENELLI NAKED 50 2T
BENELLI BENELLI PEPE 50 2T
BSV BSV AX 50
BSV BSV GZ 50
DINLI DINLI T.REX 50 2T
E-TONE E-TON VIPER RXL 50 2T
ITALJET ITALJET DRAGSTER 50 2T LC
LAVERDA LAVERDA QUASAR 50 2T (AR 03)
MALAGUTI MALAGUTI F10 50 2T
MALAGUTI MALAGUTI F12-PHANTOM 50 2T
MALAGUTI MALAGUTI CENTRO 50 2T
MALAGUTI MALAGUTI CIAK 50 2T
MALAGUTI MALAGUTI F15 FIREFOX 50 2T LC
MALAGUTI MALAGUTI F12 DIGIT KAT-PHANTOM 50 2T LC
ONLY FOR vehicles with MULTIVAR Malossi
MALAGUTI MALAGUTI F12 DIGIT KAT-PHANTOM 50 2T LC euro 2
ONLY FOR vehicles with MULTIVAR Malossi
MALAGUTI MALAGUTI F12-PHANTOM 50 2T LC
MALAGUTI MALAGUTI F12 LC 50 2T LC euro 2
ONLY FOR vehicles with MULTIVAR Malossi
MALAGUTI MALAGUTI YESTERDAY 50 2T
MBK MBK EVOLIS 50 2T
MBK MBK FIZZ 50 2T
MBK MBK FLIPPER 50 2T
MBK MBK FORTE 50 2T
MBK MBK HOT CHAMP 50 2T
MBK MBK MACH G 50 2T
MBK MBK MACH G 50 2T LC
MBK MBK NITRO 50 2T LC
MBK MBK OVETTO 50 2T
MBK MBK SORRISO 50 2T 1996->
MOTRON MOTRON SYNCRO 50
MOTRON MOTRON THUNDER'S 50
YAMAHA YAMAHA AEROX 50 2T LC euro 0-1
YAMAHA YAMAHA AEROX 50 2T LC euro 2
YAMAHA YAMAHA AXIS 50 2T
YAMAHA YAMAHA BREEZE 50 2T
YAMAHA YAMAHA JOG ER 50 2T
YAMAHA YAMAHA JOG 50 2T
YAMAHA YAMAHA JOG R 50 2T
YAMAHA YAMAHA JOGRR 50 2T LC euro 2
YAMAHA YAMAHA JOG Z 50 2T
YAMAHA YAMAHA NEO'S 50 2T
YAMAHA YAMAHA VINO 50 2T
YAMAHA YAMAHA WHY 50 2T
YAMAHA YAMAHA ZEST 50 2T
Reference: 6616783b
An ultra reinforced needle cage that will allow you to install all the engines on the market without risk of breakage.
Reference: 6611785B
High quality needle cage, reinforced! ideal on the most advanced configurations.
Reference: 66 7861B
MALOSSI Ø16mm connecting rod cage ideal for refurbishing your crankshaft.
Reference: 068014/1
A very well balanced reinforced crankshaft that will support 50cc and above configurations.
Reference: VI06
A very well balanced reinforced crankshaft which bear the largest market configuration.
Reference: 441280
A very good quality, solid and well balanced vilo, available in 10 or 12mm axis.
Reference: CIG-80R
Ideal for strengthening your lower engine and accompany a 50cc or 70cc horizontal configuration on your minarelli scooter.
Reference: IM07059
An excellent quality crankshaft, superior to the original. 10mm axle supplied with needle cage, reinforced bearings, and high quality spys seals.
Reference: S410485320006
Original ATHENA type crankshaft for your APRILIA , BENELLI, BETA scooters... For Ø10mm piston pin!
Reference: 53 8855
A very well balanced crankshaft reinforced MHR who bear the biggest market configuration. 85mm long connecting rod!
Reference: CIG-37
Ideal to strengthen your low engine and accompany a 50cc configuration or 70cc kit on your horizontal minarelli motor scooter.
Reference: 486141
A strong linkage in full masses, strengthened and very high quality with a low price! Ideal to accompany a configuration origin or slightly prepared on your motor scooter Minarelli Horizontal.
Reference: IM07014
A linkage of excellent quality, superior to the origin. 10mm axle provided with needle cage.
Reference: 263947
A strong linkage in full masses, strengthened and very high quality with a low price! Ideal to accompany a configuration origin or slightly prepared on your motor scooter Minarelli Horizontal.
Reference: 090931A
A very good quality, solid and well balanced vilo, available in 10 or 12mm axis.
Reference: 210.0010
The top-of-the-range EVOLUTION version, the ultimate in reinforced linkage!
Reference: VI05
A very well balanced reinforced crankshaft that will support the largest configuration on the market.
Reference: 210.0048
Very high quality POLINI reinforced crankshaft!
Reference: 19876
A reinforced crankshaft at a low price but very well balanced. Ideal for small kit 70cc or 50cc.