Reference: 478935
C4 reinforced crankshaft bearings kit polyamide cage + spy DOPPLER scooter minarelli (booster rocket, bws, nitro, ...)
Very good quality and solid bearing!
Banner
A strong linkage in full masses, strengthened and very high quality with a low price! Ideal to accompany a configuration origin or slightly prepared on your motor scooter Minarelli Horizontal.
The crankshaft DOPPLER Sport is a reinforced model, balanced and in full masses below ER1 models DOPPLER ENDURANCE, it is really intended for the reinforcement of driving bottom and accompany a slightly prepared engine. The steels used are of high ranges, they are treated well and hardened, balancing is dynamic and well cared for! Material that has really surprised us !!!
When talking about finishing at DOPPLER, it does not skimp and this vilo for all models! Named Sport at RRD and ORIGIN at DOPPLER, we preferred the so named because it looks nothing like an original model with its full masses, its reinforced rod ... The finish is really on top for such a price.
The link is placed on a reinforced crank pin and a much increased cage with copper anti-friction wedges. Aluminum caps are obviously cover the balance holes. For more pre compression, the masses are ultra full. The lubrication are obviously reviewed and corrected too. The rod is a well designed high quality model casting manufacturing method then polished.
In short, this crankshaft will resist without problem has origins configurations or slightly prepared the type kit 50cc or 70cc small. For engines requiring more high speeds and highest performance while preference is likewise used the model ENDURANCE or ER1 but even more expensive! The rod size, running, the diameter of the bristles remain as the origin.
technicalities:
-Model strengthened
full Masses
-Soies Diameters Ø20mm like the origin
-Bielle Reinforced size origin 80mm
-Cage Reinforced needle
-Course: Origin 39,20mm
Attention before buying: select the Ø10 or Ø12mm diameter along the axis of your piston.
Installs on horizontal scooter minarelli engine air and liquid following:
APRILIA AREA 51
APRILIA GULLIVER 50 / GULLIVER 50 LC
APRILIA RALLY 50 / RALLY 50 LC
APRILIA SCARABEO 50 2T
APRILIA SONIC 50 (CY) / SONIC 50 GP (CY)
Aprilia SR 50 LC Stealth / Racing / NETSCAPER
Aprilia SR 50 Air mod.94-95-96
Aprilia SR 50 H2O mod.94-95-96
Aprilia SR 50 WWW
ATALA CAROSELLO
BENELLI 491 GT
ST BENELLI
BENELLI 491 RR
BENELLI RACING
BENELLI SP
BENELLI SPORT
BENELLI K2
BRNELLI K2 LIQUID COOLED
BENELLI NAKED 50
BENELLI PEPE
BENELLI LX (up to 2004)
ARK BETA AIR
BETA ARK LC
BETA SERIES K
BETA EIKON 50
BETA QUADRA
BETA QUADRA CHRONO 502
BETA TEMPO
BSV AX
BSV JX
BSV GZ
GARELLI GSP 50 2T LC euro 2
ITALJET DRAGSTER LC
KTM K 50
MALAGUTI CENTRO SL
MALAGUTI CIAK
MALAGUTI F 10 (CY)
MALAGUTI F12 DIGIT KAT EURO 2 (phase 1)
MALAGUTI F12 PHANTOM 2000
MALAGUTI F12 PHANTOM LC
MALAGUTI F 15 FIREFOX H2O -
MALAGUTI YESTERDAY
MBK EQUALIS
MBK EVOLIS
MBK FIZZ
MBK FORTE
MBK HOT CHAMP
MBK MACH G
MBK NITRO H2O
MBK 50 OVETTO
MBK SORRISO 96
MOTRON STING
MOTRON SYNCRO
MOTRON THUNDER
YAMAHA AEROX H2O 2004-2005
YAMAHA AXIS
YAMAHA BREEZE
YAMAHA JOG JOG Z
YAMAHA JOG R 50
YAMAHA NEO'S 50
YAMAHA VINO
YAMAHA WHY
YAMAHA YE 50 ZEST
And many other models ...
Reference: 478935
Very good quality and solid bearing!
Reference: 090802A
Ideal for a new start or strengthen your lower engine !!
Reference: CIG-80R
Ideal for strengthening your lower engine and accompany a 50cc or 70cc horizontal configuration on your minarelli scooter.
Reference: 53 8855
A very well balanced crankshaft reinforced MHR who bear the biggest market configuration. 85mm long connecting rod!
Reference: IM07014
A linkage of excellent quality, superior to the origin. 10mm axle provided with needle cage.
Reference: CIG-37
Ideal to strengthen your low engine and accompany a 50cc configuration or 70cc kit on your horizontal minarelli motor scooter.
Reference: 248743
A reinforced vilo with a super low price for your motor scooter MINARELLI Horizontal!
Reference: 068014/1
A very well balanced reinforced crankshaft that will support 50cc and above configurations.
Reference: 090931A
A very good quality, solid and well balanced vilo, available in 10 or 12mm axis.
Reference: 53 7891
A vilo MALOSSI MHR of very good quality, solid and well balanced, available in axis of 10 or 12mm.
Reference: 263947
A strong linkage in full masses, strengthened and very high quality with a low price! Ideal to accompany a configuration origin or slightly prepared on your motor scooter Minarelli Horizontal.
Reference: S410485320006
Original ATHENA type crankshaft for your APRILIA , BENELLI, BETA scooters... For Ø10mm piston pin!
Reference: VI06
A very well balanced reinforced crankshaft which bear the largest market configuration.
Reference: 5315973
Normal stroke crankshaft 85mm rod of very high quality posable with all high motors in axis 12 and 13mm.
Reference: S410130320003
A well balanced reinforced crankshaft that will support 70cc and above configurations.
Reference: 19876
A reinforced crankshaft at a low price but very well balanced. Ideal for small kit 70cc or 50cc.
Reference: IM07059
An excellent quality crankshaft, superior to the original. 10mm axle supplied with needle cage, reinforced bearings, and high quality spys seals.