Reference: CIG-129R
Crankshaft, connecting rod assembly BARIKIT BRK 4 RACE stroke 40mm for mécaboite driving DERBI euro 3 & 4
A high quality crankshaft, ideal for strengthening your low engine while preserving an original 40mm stroke!
Banner
Here is the most upscale crankshaft from BARIKIT for DERBI euro 3 and 4 engine in 40.7mm original stroke, this slightly increased stroke allows you to slightly increase your compression ratio, your diagrams and your cylinder capacity, it must be put with a seal of around 0.5mm more!
This model which is part of the BRK (BARIKIT COMPETITION) range is cut in the best steels, it has a reinforced connecting rod which rests on an increased crankpin. Unlike other models, this vilo has a real job. on balancing and real full masses, blue caps, it therefore offers a performance gain.
It will go very well with your small and large power 50cc or 70cc kits. This vilo with its weight has excellent inertia. Comes with its needle cage.
Mounts on :
APRILIA
RS4 50cc (after 2011 - D50B0 Euro 3)
RS 50 Euro 4
RX 50cc (D50B1) dal '06
RX 50cc Factory Euro 4
SX 50cc Euro 4
SX 50cc Factory Euro 4
rs 50cc (d50b0) - von '06 prima del '11
rx enduro 50cc (d50b0) - dal '06
sx sm 50cc (d50b0) - dal '06
DERBI
GPR 50cc from 2012
Senda DRD Racing 50 SM dopo 2011 - (D50B0 Euro 3)
Senda DRD X-Treme 50 R '10 - '17 - (D50B0 Euro 3)
Senda DRD X-Treme SM '10 - '17 - (D50B0 Euro 3)
Senda E X-treme enduro '05 - '10 - (D50B0 Euro 3)
Senda Racing SM Euro 4
Senda SM Limited Euro 4
Senda X-Treme R Euro 4
Senda X-Treme SM '05 - '10 - (D50B0 Euro 3)
gpr 50cc nude von '05 prima del '11 (d50b0 euro3)
gpr 50cc racing von '05 prima del '11 (d50b0 euro3)
senda drd pro racing sm (dal '05) - (d50b0 euro 3)
senda drd pro sm (dal '05) - (d50b0 euro 3)
senda r drd pro enduro (dal '05) - (d50b0 euro3)
senda r drd racing enduro (dal '05) - (d50b0 euro3)
senda r x-race trail '05 - '10 - (D50B0 Euro 3)
senda x-race sm '05 - '10 - (D50B0 Euro 3)
GILERA
RCR Enduro 50 (dal 2011 D50B0)
RCR Enduro 50cc 2006 (D50B0) - (perimeter)
RCR Euro 4
SMT Euro 4
SMT SM 50 (2011-2012 D50B0 ZAPABB00)
SMT SM 50 (dal 2013 D50B0 ZAPABB01)
SMT SM 50cc 2006 (D50B0) - (perimeter)
Reference: CIG-129R
A high quality crankshaft, ideal for strengthening your low engine while preserving an original 40mm stroke!
Reference: VI13
A very good quality crankshaft which will support pushing engine configurations without problems!
Reference: 12100057
BIDALOT Racing Replica reinforced crankshaft for DERBI Euro 3 and 4 engine.
Reference: 486140
A crankshaft super reinforced in full masses, solid and of excellent quality with a low price! Ideal to accompany an original configuration or slightly prepared on mécaboite driving Derbi euro 3 and 4.
Reference: 31085950
An ideal quality crankshaft to strengthen its low engine at a good price!
Reference: CIG-60
A very good quality crankshaft that will support 50cc & 70cc kits without problems.
Reference: CIG-79R
A high quality crankshaft, ideal for strengthening your low engine while preserving an original 40mm stroke!
Reference: 468210
One of the best quality / price ratios on the market for your 50 DERBI euro 3 and 4 motorcycle.
Reference: 090705B
A good crankshaft at a low price which will hold very well on small 70cc for example.
Reference: 19883
A reinforced crankshaft at a low price but very well balanced. Ideal for small 70cc or 50cc kit.
Reference: CB.12.9R
The ULTIMATE vilo for DERBI EURO 3 and 4, large 20mm spans, forged mass machined rod, excellent balancing, .... The best of the best !!!
Reference: 467918
A very good crankshaft cheap to repair or strengthen your lower motor home.
Reference: 9930150
Excellent vilo delivered with its bearings and spy joints for EURO 3 and 4 engines.
Reference: 12101386
High-end reinforced FACTORY crankshaft ideal to accompany a prepared engine configuration!
Reference: 090949B
Ideal for a configuration even in 70cc, the vilo carenzi is well reinforced with a relatively low price!
Reference: 421
A very good quality mid-range crankshaft designed to go up to 14,000 rpm!