
Reference: 419
ARTEK K1 crankshaft 39mm stroke (Ø20mm bristles) for mécaboite minarelli am6
A very good quality mid-range crankshaft designed to go up to 14,000 rpm!
Banner
Here is one of the best value for money on the market offered by ARTEK. The ARTEK K1 crankshaft is a reinforced model, balanced and in full masses for MINARELLI AM6. It is really meant for low engine reinforcement and performance. The steels used are of the highest quality, they are treated and well hardened, the balancing is dynamic and really neat! For more pre-compression, the masses are full with a special coating. Forged H-shaped connecting rod which is placed on a reinforced crank pin and a well increased cage with anti-friction wedges. Grease points at the head and bottom of the connecting rod were used for increased reliability. Thanks to its architecture and its quality, this crankshaft can take a rotation speed of 14000 rpm! Neat dynamic balancing. Comes complete, as in our photo, with its reinforced needle cage. In short, this crankshaft will withstand most engines fitted, it offers excellent performance and strength to match. For engines intended for higher and more efficient speeds, we will still prefer to use the K2 model, which is certainly more expensive but designed to support larger engine configurations!
Characteristics:
-Masses: full
-Soies (bearing seats): in original diameter Ø20mm
-Reinforced connecting rod original size 90mm
-Original stroke 39.00mm
- Keying: yes
-Delivered with its needle cage
Mounts on 50cc motorcycles with gearbox equipped with the minarelli am3, am4, am5, am6 euro 1, am6 euro 2 engine:
APRILIA RS 50cc am6 engine from 1997 to 2006 (new attention after 2006 in derbi euro 3 engine)
APRILIA RX am6 engine (attention news after 2006 in derbi euro 3 engine)
APRILIA MX am6 engine (attention news after 2006 in derbi euro 3 engine)
APRILIA TUONO 50cc am6 engine from 1997 to 2006 (new attention after 2006 in derbi euro 3 engine)
BETA RR
BETA RR ALU
BETA CRE
HONDA HM
HONDA CRE
HONDA BAJA
HUSQUVARNA WXE
HUSQUVARNA CH
HM DERAPAGE
HM CRE
MALAGUTI DRAKON
MALAGUTI XTM
MALAGUTI XSM
FANTIC CABALLERO
PEUGEOT XP6
PEUGEOT XPS
MOTORHISPANIA RYZ
PEUGEOT XPS
PEUGEOT XP STREET
PEUGEOT XP STREET EVO
PEUGEOT XR6
MOTORHISPANIA RX
PEUGEOT XR7
MOTORHISPANIA RX-R
RIEJU RS1
RIEJU RS2
RIEJU RS2 MATRIX
RIEJU RS2 MATRIX PRO
RIEJU SMX
RIEJU MRX
RIEJU SPIKE
KEEWAY TX FR
YAMAHA DT
MBK X-LIMIT
YAMAHA TZR
MBK X-POWER
SHERCO SM
SHERCO ENDURO
SHERCO HRD
SHERCO ENDURO
CPI SM
And many other machines!
Reference: 419
A very good quality mid-range crankshaft designed to go up to 14,000 rpm!
Reference: 075414
A very high quality crankshaft, in large bristles, full masses delivered with its bearings for am6 engine!
Reference: 19880
A reinforced crankshaft at a low price but very well balanced. Ideal for small 70cc or 50cc kit.
Reference: 9921720
A vilo of quality to guarantee a solid and powerful engine!
Reference: 264006
The DOPPLER ER1 is the best value for money on the market, this model is reinforced and well balanced.
Reference: S410130320001
A good crankshaft reinforced and in full masses for your minarelli am6 with bearings of origin size.
Reference: 367223
One of the best quality, price and performance ratios on the market.
Reference: CB.44.91R
The ULTIMATE vilo for am6, gorsses worn 20mm, celerons bearings, forged rod machined mass, excellent balancing, .... The best of the best !!!
Reference: VI01
A very well balanced reinforced crankshaft that will support the largest configuration on the market.
Reference: 6030003
High quality crankshaft at low price for am6 engine.
Reference: CB.44.91
A crankshaft of high quality with a casting rod, delivered with its bearings celeron big litter !!!
Reference: 210.0052
The new version of the crankshaft POLINI EVO for minarelli am6!
Reference: 31134950
A good reinforced crankshaft that mounts to virtually any configuration for an unbeatable price.
Reference: 5312280
A very high quality crankshaft, dynamic balancing, cut from the best steels, all the know-how of MALOSSI MHR for your am6 engines!
Reference: 090935A
A crankshaft, solid, reinforced and of very good quality for a small price.
Reference: 451390
A very good crankshaft at low prices which will support 50cc kits like 80cc.