Reference: 9921330
Reinforced TOP PERFORMANCES needle cage Ø12X15X15mm minarelli am6, 103, DERBI , PIAGGIO , PUCH...
A high quality TOP PERFORMANCES needle cage for Peugeot 103, Minarelli am6... engines.
Banner
This TOP PERFORMANCES crankshaft is an original type model because it preserves the original 39 mm stroke, the bristles (bearing housings) of original size Ø17 mm and its masses are not full! However, it is really reinforced, the materials used for its construction are of the highest range, the connecting rod is a wide forged model and reinforced with reinforced head and foot cages, all the lubrication has been re-studied…. The crankpin has also been increased for even more resistance.
With its pack bearings and spy joints. Its quality is no longer to be proven, it is well reinforced, and like an original it has no specific work on the balancing level.It will be perfect on an original engine, from the 50cc kit or even small 70cc. Mounts on mécaboite Minarelli AM6 engine. Cut from the best steels, it is strong and resistant. Delivered with its needle cage, set of 2 bearings + 2 spy joints, you will understand it has the same characteristics (dimensions, sizes ...) as the origin. Indisputable quality / price ratio, it is a really good quality crankshaft!
Features :
-Reinforced: yes
- Keying: yes
-Size of the bristles: origin Ø17 mm
-Course: 39.00 mm (original)
-Full masses: no
-Diameter of masses: Ø76 mm
-Size of connecting rod: 85 mm (original)
-Size of the needle cage Ø12X15X15 mm
-X2 SKF 6203 / C3 bearings Ø47X17X14 mm
-X2 Gaskets spy (spinnaker) of original crankshaft
Mounts on 50cc motorcycles with gearbox equipped with the minarelli am3, am4, am5, am6 euro 1, am6 euro 2 engine :
APRILIA RS 50cc am6 engine from 1997 to 2006 (new attention after 2006 in derbi euro 3 engine)
APRILIA RX am6 engine (attention news after 2006 in derbi euro 3 engine)
APRILIA MX am6 engine (attention news after 2006 in derbi euro 3 engine)
APRILIA TUONO 50cc am6 engine from 1997 to 2006 (new attention after 2006 in derbi euro 3 engine)
BETA RR
BETA RR ALU
BETA CRE
HONDA HM
HONDA CRE
HONDA BAJA
HUSQUVARNA WXE
HUSQUVARNA CH
HM DERAPAGE
HM CRE
MALAGUTI DRAKON
MALAGUTI XTM
MALAGUTI XSM
FANTIC CABALLERO
PEUGEOT XP6
PEUGEOT XPS
MOTORHISPANIA RYZ
PEUGEOT XPS
PEUGEOT XP STREET
PEUGEOT XP STREET EVO
PEUGEOT XR6
MOTORHISPANIA RX
PEUGEOT XR7
MOTORHISPANIA RX-R
RIAJU RS1
RIEJU RS2
RIEJU RS2 MATRIX
RIEJU RS2 MATRIX PRO
RIEJU SMX
RIEJU MRX
RIEJU SPIKE
KEEWAY TX
YAMAHA DT
MBK X-LIMIT
YAMAHA TZR
MBK X-POWER
SHERCO SM
SHERCO ENDURO
SHERCO HRD
SHERCO ENDURO
CPI SM
And many other machines!
Reference: 9921330
A high quality TOP PERFORMANCES needle cage for Peugeot 103, Minarelli am6... engines.
Reference: KK01001
A high quality pack, to reinforce a low engine with a bristle crankshaft (bearing bearings) of original size Ø17mm! C3 models reinforced polyamide cage with racing spy joints!
Reference: K070090
Indispensable for the refurbishment of your low am6 engine.
Reference: 075414
A very high quality crankshaft, in large bristles, full masses delivered with its bearings for am6 engine!
Reference: S410130320001
A good crankshaft reinforced and in full masses for your minarelli am6 with bearings of origin size.
Reference: 090935A
A crankshaft, solid, reinforced and of very good quality for a small price.
Reference: 367223
One of the best quality, price and performance ratios on the market.
Reference: 150838
The most performance crankshaft from ARTEK which can go up to 20,000 revolutions!
Reference: CB.44.91R
The ULTIMATE vilo for am6, gorsses worn 20mm, celerons bearings, forged rod machined mass, excellent balancing, .... The best of the best !!!
Reference: CIG-29
A reinforced version in solid masses for minarelli am6 with normal size bearings!
Reference: 9921720
A vilo of quality to guarantee a solid and powerful engine!
Reference: CB.44.91
A crankshaft of high quality with a casting rod, delivered with its bearings celeron big litter !!!
Reference: 80038
An excellent crankshaft, made in Italy, finishing and impeccable balancing!
Reference: 090936B
An ultra reinforced and perfectly balanced crankshaft for AM6. Ideal for large setups.
Reference: CIG-42
A reinforced version, full masses for minarelli am6 with bearings Ø20mm big litter.
Reference: 264006
The DOPPLER ER1 is the best value for money on the market, this model is reinforced and well balanced.
Reference: 210.0052
The new version of the crankshaft POLINI EVO for minarelli am6!
Reference: 6030003
High quality crankshaft at low price for am6 engine.
Reference: CIG-22
A reinforced crankshaft sport for minarelli am6!