- New
Reference: 99CRAM1000
copy of YAMAHA original right and left engine casings for MINARELLI AM6
Genuine original engine casings for MINARELLI AM6 engine.
Banner
Not homologated on the open road, part formally reserved for competition, this crankshaft increases the engine capacity.
A very elaborate crankshaft (crankshaft), digitally over-balanced by 4 special alloy masses, high resistance to torque and revs (16,000 rpm / max and more). Use it to upgrade your kit from 80 to 85cc thanks to the long 44mm stroke or to replace the crankshafts that are supplied in the Top Performances cast iron 85cc and TPR aluminum 86cc maxi packs. Original cage diameter Ø12mm. Following the TPR study, for a catch-up of the forcing, they opted for silks (crankshaft arm where the bearing is housed) of original diameter for the clutch side and large silk (Ø20mm) on the ignition side for more resistance and less vibration.
Delivered with reinforced needle cage d.12X15XL15mm (original size), offset key, set of reinforced bearings. The mass materials are very high-end in case-hardened steel with a finish, the connecting rod pin is revised upwards for more resistance, the foot and head cages are reinforced to the maximum. The greasing of the big end and connecting rod foot are increased to the maximum for less wear. The full masses of this crankshaft will bring you maximum pre-compression for even more torque and power.
The connecting rod is of course mounted on anti-friction shims, it is reinforced and of original size (85mm) which will allow you to be able to mount this crankshaft on any kit intended for normal racing by just placing a shim of 2.5mm at the base of the cylinder.
This pack contains:
-Needle cage Ø12mmX15mmXL15mm
-V ileshaft race 44mm connecting rod 85mm full masses
-Reinforced bearing set
-Notice
Provide a set of special TPR bearings and a 2.5mm base shim if you want to mount it on a kit intended for normal racing.
Mounts on 50cc motorcycles with gearbox equipped with the minarelli am3, am4, am5, am6 euro 1, am6 euro 2 engine :
APRILIA RS 50cc am6 engine from 1997 to 2006 (warning news after 2006 in derbi euro 3 engine)
APRILIA RX am6 engine (warning news after 2006 in derbi euro 3 engine)
APRILIA MX am6 engine (warning news after 2006 in derbi euro 3 engine)
APRILIA TUONO 50cc am6 engine from 1997 to 2006 (warning news after 2006 in derbi euro 3 engine)
BETA RR
BETA RR ALU
BETA CRE
HONDA HM
HONDA CRE
HONDA BAJA
HUSQUVARNA WXE
HUSQUVARNA CH
HM DERAPAGE
HM CRE
MALAGUTI DRAKON
MALAGUTI XTM
MALAGUTI XSM
FANTIC CABALLERO
PEUGEOT XP6
PEUGEOT XPS
MOTORHISPANIA RYZ
PEUGEOT XPS
PEUGEOT XP STREET
PEUGEOT XP STREET EVO
PEUGEOT XR6
MOTORHISPANIA RX
PEUGEOT XR7
MOTORHISPANIA RX-R
RIAJU RS1
RIEJU RS2
RIEJU RS2 MATRIX
RIEJU RS2 MATRIX PRO
RIEJU SMX
RIEJU MRX
RIEJU SPIKE
KEEWAY TX EN
YAMAHA DT
MBK X-LIMIT
YAMAHA TZR
MBK X-POWER
SHE RC O SM
SHE RC O EN DURO
SHE RC O HRD
SHE RC O EN DURO
ICC SM
And many other machines!
Reference: 99CRAM1000
Genuine original engine casings for MINARELLI AM6 engine.
Reference: 99CRAF1000
Genuine original engine casings for MINARELLI AM6 engine.
Reference: 99GT52AM00
The biggest kit in the world for minarelli am6 !!! Ø55mm, for 46mm stroke / 90mm connecting rod! We are a monster couple.
Reference: CIG-49
High quality crankshaft, special model 42mm long race 85mm rod.
Reference: 80039
A carefully balanced crankshaft with premium materials for maximum strength.
Reference: 53460.14
A senior special crankshaft range 46mm long race 90mm rod, delivered with its bearings!
Reference: CB.44.8
A horse race between normal and long, wedge assembly without machining or on your small gain am6 and engine capacity (+ 1mm travel).
Reference: CIG-99R
Ideal for increasing the displacement, torque and power without retouch the charts requires a 3mm wedge and a high motor suitable for 45mm race!
Reference: 31137350
Crank quality and good price! Long stroke model with 45mm rod 85mm reinforced.
Reference: CB.44.10
A crankshaft of high quality with a rod casting 85mm, 44mm stroke, delivered with its bearings celeron Ø20mm big litter !!!
Reference: 99AL47AM00
Vilo TOP PERFORMANCES TPR long race for your am6 engine, a concentrate of performance & quality at an attractive price!
Reference: CIG-56
High quality crankshaft, special model 43mm long race 85mm rod.
Reference: CB.44.90.R
Mazzuchelli top-of-the-range 44.00mm long stroke special crankshaft, 90mm machined forged connecting rod for improved motor movement, ... with silver treated needle cage and celeron bearings.
Reference: 12100568
A high-end vilebrequin, special long 39.6mm race to accompany a high motor BIDALOT RF 50 WR.
Reference: 12100966
An upscale crankshaft 48mm long stage race to accompany a high BIDALOT FACTORY 94cc engine with machining of crankcase!
Reference: 12100866
A high-end crankshaft, special long stroke 44.9mm to accompany a high engine BIDALOT FACTORY 80 or 88cc.
Reference: CB.44.10R
Mazzuchelli top-of-the-range 44.00mm long stroke special crankshaft, forged rod machined in the mass 85mm, ... with silver treated needle cage and C4 bearings.
Reference: CIG-57
High quality crankshaft, special model 44mm long race 85mm rod.
Reference: CIG-133R
A reinforced crankshaft for a low solid engine, ideal to accompany a prepared configuration! Stroke slightly increased to 40.7mm!