Banner

Shame ITALKIT for motorcycle 125 2T ROTAX 122, APRILIA RS, RX, MX, TUONO...

Reference CB.01.122

Replacement clutch for ROTAX 122 engine.

€270.83

Quantity

Shipment within 1 to 3 days

Description
Product Details

Description

Here's the competition crankshaft from the ITALKIT. Careful balancing, assembly with a beautiful metrology, quality of top steels, standard casting rod... We're on a nice quality room to refurbish his ROTAX 122! Comes with its needle cage 15x19x20mm, don't forget the bearings, spi joints, motor seals and box oil when ordering for a perfect winding.

Product Details

Reference CB.01.122

In stock 20 Items

Condition New product

Complete gasket set (27 pieces) ATHENA for ROTAX 122 125cc 2-stroke engine APRILIA MX, RS, RX, CLASSIC ... from 1995 to 2010

For a complete refurbishment of the engine tightness of your motorcycle!

€33.33

Shipping in 1-3 days

IPONE BOX X-TREM Competition gearbox oil for 2-stroke motorcycle, oil bath clutch 1L

Quick view

Reference: 105895

MOTUL TRANSOIL EXPERT gearbox oil for 2-stroke motorcycle, 1L oil bath clutch

One of the best semi-synthetic gearbox oils for 2-stroke motorcycles with wet clutch, from competition!

€16.66

Shipping in 1-3 days

ATHENA Athesil RTV Silicone Sealant Joint Paste 80 ml

Quick view

Reference: M813002000001

ATHENA Athesil RTV Silicone Sealant Joint Paste 80 ml

Paste with elastic joint and resistant to high temperatures. (300 ° C)

€14.16

Shipping in 1-3 days

2 bearings + joined spy, spi of crankshaft reinforced SNR motor bike 125cc 2 times APRILIA RS…

Quick view

Reference: KCR-36

2 bearings C4 TN9 + spy joints, reinforced crankshaft spinnaker SNR motorcycle 125cc APRILIA RS, MOTOR ROTAX MOTO 125cc ...

A pack of crankshaft spy seals with high quality C4 bearings, ideal for the refurbishment and reinforcement of your low engine!

€41.66

Shipping in 1-3 days

16 other products in the same category:

Cale vilebrequin d'origine 30.4/40.5/0.1mm pour Pegaso, AF1, Tuareg et Red Rose 125cc

Quick view

Reference: AP0944583

Original crankshaft shim 30.4 / 40.5 / 0.1mm for APRILIA RS, RX, SX, TEX, CLASSIC, TUONO ... 125cc 2T (ROTAX 122 engine)

Ideal shim for the timing of your crankshaft.

€11.10

Attention, requires a delay of 15 days.

Reinforced TOP RACING Connecting Rod (Length 110mm, Ø22mm pin, 16mm axle) YAMAHA DT, DTR, TZR, TDR ... 125cc 2T

Quick view

Reference: 6001064

Reinforced TOP RACING Connecting Rod YAMAHA DTLC, DT LC 125 with valve (YPVS) from 1984 to 1992

Complete connecting rod kit for YAMAHA 125cc 2T LC engines fitted to the DTLC, DT LC with YPVS exhaust valve, from 1984 to 1992.

€74.99

Attention, requires a period of more than 20 days!

ITALKIT crankshaft connecting rod Competition reinforced (Length 110mm, crankpin Ø26mm, axis 19mm) motor karting rotax max

Quick view

Reference: BC.1731S

ITALKIT rod reinforced Competition (length 100mm, Ø22mm crank pin, axis 16mm) MOTO HONDA NS-F 125cc 2T

Rod casting competition reinforced upscale Made in Italy! Length model with 100mm crank pin Ø22mm for axis Ø16mm piston.

€115.83

Attention, requires a period of more than 20 days!

Quick view

Reference: AP0944586

Original crankshaft shim 30.4/40.5/0.2mm for APRILIA RS, RX, SX, TEX, CLASSIC, TUONO... 125cc 2T (ROTAX 122 engine)

Ideal wedge for setting your crankshaft.

€8.33

Attention, requires a period of more than 20 days!

PARMAKIT reinforced crankshaft for 125cc 2-stroke motorcycle YAMAHA DT, TZR…

Quick view

Reference: 76018.14

Crankshaft reinforced PARMAKIT for motorcycle 125 2T YAMAHA DT, TZR, TDR ...

High-end crankshaft engine YAMAHA 125cc 2-stroke 1988 to 2004 kick start only.

In stock

ITALKIT rod reinforced Competition (110mm length, Ø22mm crank pin, axis 16mm) MOTO YAMAHA TZR 125cc 2T ...

Quick view

Reference: BC.1210.1S

ITALKIT Competition rod reinforced (Length 110mm, crank pin Ø22mm, axis 16mm) MOTO YAMAHA DT, DTR, TZR, TDR ... 125cc 2T

Reinforced casting competition rod for YAMAHA 125cc 2T LC engines from 1988 on TZR, DT, DTX, DTRE, TDR, DERBI GPR, GILERA SC ...

€103.33

Attention, requires a period of more than 20 days!

ITALKIT ITALKIT Ø20 x 56.65mm for ITALKIT connecting rod from ITALKIT to 125cc

Quick view

Reference: BUC.2055

ITALKIT pin Ø20 x 55mm rod for ITALKIT of 75cc to 250cc

Spare pin for 75cc 125cc engine.

€21.66

Shipping in 1-3 days

Quick view

Reference: 6001069

TOP RACING reinforced connecting rod (Length 110mm, crank pin Ø22mm, axis 16mm) YAMAHA DT, DTR, TZR, TDR ... 125cc 2T

Complete connecting rod kit for YAMAHA 125cc 2T LC engines from 1988 on TZR, DT, DTX, DTRE, TDR, DERBI GPR, GILERA SC ...

€64.99

Shipping in 1-3 days

Quick view

Reference: CB.01.122R

Reinforced crankshaft ITALKIT COMPETITION for motorcycle 125 2T ROTAX 122, APRILIA RS, RX, MX, TUONO...

High-end combination for ROTAX 122 engine.

€333.33

Shipment within 1 to 3 days

Original crankshaft APRILIA TUAREG, RX, AF, AF1, PEGASO 125cc 2T (ROTAX engine)

Quick view

Reference: AP0293846

original crankshaft APRILIA TUAREG, RX, AF, AF1, Pegaso 125cc 2T (ROTAX 123 engine, 127 and 125)

Genuine original crankshaft ROTAX 123, 127 and 125 to 125cc Aprilia.

€744.16

Attention, requires a period of more than 20 days!

Reinforced TOP RACING Connecting Rod (Length 110mm, Ø22mm crank pin, 16mm axle) CAGIVA MITO, ALETTA, ELEPHANT, C10 ... 125cc

Quick view

Reference: 6001156

Reinforced TOP RACING Connecting Rod (Length 110mm, Ø22mm crank pin, 16mm axle) CAGIVA MITO, ALETTA, ELEPHANT, C10 ... 125cc

Bielle competition casting reinforced! Model length 110mm with Ø22mm crank pin for Ø16mm piston pin for 2T CAGIVA engines.

In stock

Reinforced casting TOP RACING Connecting Rod (Length 110mm, crank pin Ø20mm, axis 15mm) MOTO and KARTING ROTAX 125cc

Quick view

Reference: 6001062

Reinforced casting TOP RACING Connecting Rod (Length 110mm, crank pin Ø20mm, axis 15mm) MOTO and KARTING ROTAX 125cc

High-end reinforced casting link! Model length 110mm with crank pin Ø20mm for piston pin Ø15mm For motor KARTING and ROTAX 127 motorcycle 125cc 2T.

€58.33

Attention, requires a period of more than 20 days!

Bielle de vilebrequin ITALKIT Compétition renforcée (Longueur 110mm, maneton Ø26mm, axe 19mm) moteur karting rotax max

Quick view

Reference: BC.2752S

ITALKIT Competition reinforced casting rod (Length 110mm, crank pin Ø20mm, axis 15mm) MOTO and KARTING ROTAX 125cc engine

High-end reinforced casting competition rod Made in Italy! 110mm long model with Ø20mm crank pin for Ø15mm piston pin For KARTING and ROTAX 127 engine of 125cc 2T motorcycle.

€89.99

Shipping in 1-3 days

ITALKIT rod reinforced Competition (length 110mm, Ø20mm crank pin, axis 16mm) MOTO CAGIVA MITO, ALETTA, ELEPHANT, C10 125cc ...

Quick view

Reference: BC.1211S

ITALKIT Competition rod reinforced (Length 110mm, crank pin Ø22mm, axis 16mm) MOTO CAGIVA MITO, ALETTA, ELEPHANT, C10 ... 125cc

High-end reinforced casting competition rod Made in Italy! 110mm long model with Ø22mm crank pin for Ø16mm piston pin.

€115.83

Shipping in 1-3 days

Quick view

Reference: 6001072

Reinforced TOP RACING Connecting Rod YAMAHA DTLC, DT LC 125 without valve (without YPVS) before 1984

Complete connecting rod kit for YAMAHA 125cc 2T LC engines fitted to the DTLC, DT LC without exhaust valve YPVS, before 1984.

€58.33

Attention, requires a period of more than 20 days!

ITALKIT Connecting Rod Forged forged competition (Length 115mm, crank pin Ø20mm, axis 15mm) MOTO ROTAX 125cc engine (APRILIA)

Quick view

Reference: BC2752RR

ITALKIT Connecting Rod Forged forged competition (Length 115mm, crank pin Ø20mm, axis 15mm) MOTO ROTAX 125cc engine (APRILIA)

Bielle competition reinforced casting high-end Made in Italy! Model length 115mm with Ø26mm crankpin for Ø15mm axle Requires a shim under the cylinder on some engines.

€222.49

Attention, requires a period of more than 20 days!