Reference: 9.149.25.1.012
Crankshaft, connecting rod assembly RITO long stroke 44mm for SACHS engine
44mm long stroke crankshaft for SACHS engine.
Banner
TOP RACING high quality reinforced connecting rod from JASIL for MINARELLI P6, P6R and RV6 engines.
Ideal for refurbishing your crank assembly with quality and therefore with complete peace of mind!
Technical characteristics :
Length: 85mm
Pin Ø: 16mm
Connecting rod big end width (crankpin side): 12mm
Crank pin length: 34.7mm
External Ø of the big end cage (crankpin): 22mm
External Ø of the connecting rod (piston) foot cage: 16mm
Connecting rod (piston) foot cage delivered: 12X16X15mm
Big end cage (crankpin) delivered: 16X22X12mm
Mounts on:
MINARELLI P6
MINARELLI P6R
MINARELLI RV6
Reference: 9.149.25.1.012
44mm long stroke crankshaft for SACHS engine.
Reference: 9.149.21.1.012
Long stroke crankshaft 42mm for SACHS engine with 3 speeds at feet.
Reference: 9.033.21.1.015
44mm long stroke crankshaft for CASAL engine with 6 speed ratios.
Reference: 09.117.90.1.015
A very high quality crankshaft in 44mm stroke for your MINARELLI P6R.
Reference: 6030038
Crankshaft for old engines CASAL has 2 speeds 50 2T.
Reference: 9.117.89.1.015
A very high quality 42mm stroke crankshaft for your MINARELLI P6R.
Reference: AMT 152A
An unusual crankshaft in a 44m race for your MINARELLI P4, P6 ... engine.
Reference: 9.117.25.1.115
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P6, P6R and RV6.
Reference: 9.033.20.1.015
Original 40mm stroke crankshaft for 6-speed CASAL engine.
Reference: BC.1522
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P6, P6R and RV6.
Reference: 9.149.15.1.012
40mm stroke crankshaft for SACHS engine.
Reference: 9.117.86.1.015
Original 39.1mm stroke crankshaft for MINARELLI P6 engine.
Reference: 09.117.85.1.015
Original 39.1mm stroke crankshaft for MINARELLI CORSA CORTA engine.
Reference: 9.149.19.1.012
42mm long stroke crankshaft for 2 speed SACHS engine.
Reference: 9.096.21.1.013
Crankshaft for KREIDLER, FLORETT ...
Reference: 9.117.25.1.111
Rod reinforced 85mm, crank pin Ø16mm for MINARELLI P4R, P4, RV4.