
Reference: 9.117.25.1.114
RITO reinforced connecting rod for MINARELLI P5R length 85mm crank pin Ø16mm
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P5R.
Banner
Very high quality RITO crankshaft for SACHS 80 engine. Long stroke 48mm, in very high-end steel. Lubrication hole at the small end.
Ultra reinforced connecting rod. Anti-friction wedges.
Made to measure in small series. Dynamic balancing, specifically designed for engines prepared with large kits.
Solid masses for more pre-compression. Crankpin increased, lubrication re-studied.
Crankshaft for SACHS 80 long stroke 48mm :
17mm bristles (bearing seats)
Crankpin offset at 24mm (stroke 48mm)
Connecting rod length: 95mm
Ignition arm: 71.5mm
Other arm: 92.6mm
Reference: 9.117.25.1.114
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P5R.
Reference: 09.117.90.1.015
A very high quality crankshaft in 44mm stroke for your MINARELLI P6R.
Reference: 9.149.23.1.012
Long stroke crankshaft 42mm for 3 speed SACHS engine by hand.
Reference: BC.1530
Rod reinforced 85mm, crank pin Ø16mm for MINARELLI P4R, P4, RV4.
Reference: 9.117.89.1.015
A very high quality 42mm stroke crankshaft for your MINARELLI P6R.
Reference: 9.117.88.1.015
44mm long stroke crankshaft for MINARELLI K6 50 engine
Reference: 9.149.09.1.012
39.7mm original stroke crankshaft for SACHS engine.
Reference: AMT 152A
An unusual crankshaft in a 44m race for your MINARELLI P4, P6 ... engine.
Reference: AMT 032A
High quality crankshaft, special 42mm long stroke model with 85mm connecting rod.
Reference: 6030039
Crankshaft for old engines CASAL has 4 and 5 speeds 50 2T.
Reference: BC.1522
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P6, P6R and RV6.
Reference: 9.149.15.1.012
40mm stroke crankshaft for SACHS engine.
Reference: 9.117.25.1.115
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P6, P6R and RV6.
Reference: 9.149.19.1.012
42mm long stroke crankshaft for 2 speed SACHS engine.
Reference: 53488.14
A crankshaft of very high quality cortex 44mm for your MINARELLI P6.
Reference: 9.117.25.1.111
Rod reinforced 85mm, crank pin Ø16mm for MINARELLI P4R, P4, RV4.