Reference: 9.117.25.1.111
RITO reinforced connecting rod for MINARELLI P4, P4R, RV4 length 85mm crank pin Ø16mm
Rod reinforced 85mm, crank pin Ø16mm for MINARELLI P4R, P4, RV4.
Banner
Very high quality RITO crankshaft for standard SACHS engine. 40mm original stroke (very close to the origin, small grain of stroke / displacement and diagrams), in very high-end steel. Ultra reinforced connecting rod. Made in small custom series. Dynamic balancing, specifically designed for engines prepared with large kits but also mounts very well on original engines or in 50cc kit. Solid masses for more pre-compression. Reinforced crankpin, re-studied scratching.
Also exists in long race 44mm and original 39.7mm.
Crankshaft for SACHS original 40mm stroke :
17mm bristles (bearing surfaces)
Crank pin offset at 20mm (40mm stroke)
Connecting rod length: 85mm
Ignition arm: 71.5mm
Other arm: 92.6mm
Reference: 9.117.25.1.111
Rod reinforced 85mm, crank pin Ø16mm for MINARELLI P4R, P4, RV4.
Reference: 9.096.22.1.013
Crankshaft for KREIDLER, FLORETT ...
Reference: 9.033.21.1.015
44mm long stroke crankshaft for CASAL engine with 6 speed ratios.
Reference: 6030039
Crankshaft for old engines CASAL has 4 and 5 speeds 50 2T.
Reference: 9.149.25.1.012
44mm long stroke crankshaft for SACHS engine.
Reference: 9.117.86.1.015
Original 39.1mm stroke crankshaft for MINARELLI P6 engine.
Reference: 9.096.24.1.015
Original 39.7mm stroke crankshaft for KREIDLER, FLORETT ...
Reference: 6030016
Crankshaft type original quality for MINARELLI P6 and P4 has 4 speeds.
Reference: 9.149.21.1.012
Long stroke crankshaft 42mm for SACHS engine with 3 speeds at feet.
Reference: 09.149.41.1.012
48mm long stroke crankshaft for SACHS 80 2T engine.
Reference: 9.117.25.1.114
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P5R.
Reference: AMT 032A
High quality crankshaft, special 42mm long stroke model with 85mm connecting rod.
Reference: 6030071
Here is the Crankshaft of original type Top Racing for Zundapp 3 & 4 Speed C 50 GTS CS CX ZD ZL NEU ....
Reference: BC.1522
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P6, P6R and RV6.
Reference: BC.1530
Rod reinforced 85mm, crank pin Ø16mm for MINARELLI P4R, P4, RV4.
Reference: 53488.14
A crankshaft of very high quality cortex 44mm for your MINARELLI P6.