
Reference: 9.149.25.1.012
Crankshaft, connecting rod assembly RITO long stroke 44mm for SACHS engine
44mm long stroke crankshaft for SACHS engine.
Banner
Very high quality RITO crankshaft for MINARELLI CORSA CORTA engine. Original stroke 39.1mm, in very high-end steel.
Ultra reinforced connecting rod. Made to measure in small series. Dynamic balancing, specifically designed for engines prepared with large kits but can also be mounted very well on original engines or in 50cc kit.
Full masses for more pre-compression. Crankpin increased, grading re-studied.
Also available in long stroke.
Crankshaft for MINARELLI CORSA CORTA original race 39.1mm :
17mm bristles (bearing seats)
Crank pin offset at 19.55mm (stroke 39.1mm)
Connecting rod length: 85mm
Ignition arm: 71.2mm
Other arm: 75.7mm
Reference: 9.149.25.1.012
44mm long stroke crankshaft for SACHS engine.
Reference: AMT 152A
An unusual crankshaft in a 44m race for your MINARELLI P4, P6 ... engine.
Reference: 9.149.23.1.012
Long stroke crankshaft 42mm for 3 speed SACHS engine by hand.
Reference: 9.117.25.1.114
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P5R.
Reference: 9.117.25.1.115
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P6, P6R and RV6.
Reference: 09.117.85.1.015
Original 39.1mm stroke crankshaft for MINARELLI CORSA CORTA engine.
Reference: 9.117.25.1.111
Rod reinforced 85mm, crank pin Ø16mm for MINARELLI P4R, P4, RV4.
Reference: AMT 256A
Very high quality! High-end materials, an extraordinary and very rare piece.
Reference: BC.1522
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P6, P6R and RV6.
Reference: 6030038
Crankshaft for old engines CASAL has 2 speeds 50 2T.
Reference: 9.096.21.1.013
Crankshaft for KREIDLER, FLORETT ...
Reference: 9.117.88.1.015
44mm long stroke crankshaft for MINARELLI K6 50 engine
Reference: 9.117.87.1.015
44mm long stroke crankshaft for MINARELLI MR6 50 engine
Reference: 6001013
Connecting rod reinforced in 85mm, pin Ø16mm for MINARELLI P6, P6R and RV6.
Reference: 9.096.23.1.013
Crankshaft for KREIDLER, FLORETT ...
Reference: 9.117.89.1.015
A very high quality 42mm stroke crankshaft for your MINARELLI P6R.