
Reference: 9.117.25.1.114
RITO reinforced connecting rod for MINARELLI P5R length 85mm crank pin Ø16mm
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P5R.
Banner
Crankshaft type origin of very good quality, manufactured in Portugal.
Allows the refurbishment of your low CASAL motor at 4 and 5 speeds (the CASAL bikes were very common in Portugal and in other countries, they had a specific engine MINARELLI / ZUNDAPP).
Comes with his cage that needle.
Reference: 9.117.25.1.114
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P5R.
Reference: 09.117.90.1.015
A very high quality crankshaft in 44mm stroke for your MINARELLI P6R.
Reference: 9.149.23.1.012
Long stroke crankshaft 42mm for 3 speed SACHS engine by hand.
Reference: BC.1530
Rod reinforced 85mm, crank pin Ø16mm for MINARELLI P4R, P4, RV4.
Reference: 9.117.89.1.015
A very high quality 42mm stroke crankshaft for your MINARELLI P6R.
Reference: 9.117.88.1.015
44mm long stroke crankshaft for MINARELLI K6 50 engine
Reference: 9.149.09.1.012
39.7mm original stroke crankshaft for SACHS engine.
Reference: AMT 152A
An unusual crankshaft in a 44m race for your MINARELLI P4, P6 ... engine.
Reference: AMT 032A
High quality crankshaft, special 42mm long stroke model with 85mm connecting rod.
Reference: 6030039
Crankshaft for old engines CASAL has 4 and 5 speeds 50 2T.
Reference: BC.1522
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P6, P6R and RV6.
Reference: 9.149.15.1.012
40mm stroke crankshaft for SACHS engine.
Reference: 9.117.25.1.115
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P6, P6R and RV6.
Reference: 9.149.19.1.012
42mm long stroke crankshaft for 2 speed SACHS engine.
Reference: 53488.14
A crankshaft of very high quality cortex 44mm for your MINARELLI P6.
Reference: 9.117.25.1.111
Rod reinforced 85mm, crank pin Ø16mm for MINARELLI P4R, P4, RV4.