MOTUL MOCOOL competition coolant 0.5L to dilute

High performance product to be diluted, put 5% of MOCOOL in distilled or reverse osmosis water. Then fill your car, karting, motorcycle, quad cooling circuit ... It allows a gain of around 15 ° C compared to a traditional coolant by improving heat exchange.

Do not use in winter! It is not anti-freeze!

MoCool

Engine cooling additive
Reduces engine temperature by 15 ° C (30 ° F)
Improves heat exchange
Concentrated coolant

USE
Any cooling circuit for motorcycles, cars, quads, ATVs ... in cases of overheating or in competition to reduce the operating temperature of the engine.

WARNING :

- For some races, the regulations require the use of pure water, in case of doubt,
check with the official race organization before using MoCool. Motul cannot be
involved in case of disqualification due to improper use of MoCool.
- MoCool does not protect against freezing

PERFORMANCE
APPROVALS Approved by ASRA (American Sport Bike Racing Association)
Approved by CCS (Championship Cup Series)
Approved by WERA Motorcycle Roadracing
With MoCool, motors run 15 ° C (30 ° F) cooler: Improves heat exchange and
the efficiency of the cooling system.
Optimal protection of the cooling circuit against corrosion.
Recommended for casings in magnesium alloys, aluminum, for cast iron blocks as well as for brass, copper or bronze parts.
Water pump protection, prevent cavitation.

Anti-corrosion properties resistant to high temperatures and over time. Low consumption of corrosion inhibitors.

Compatible with gaskets, hoses, and plastic components.

USAGE TIPS

MOTUL MoCool is a concentrated coolant to be mixed with distilled water for a
immediate use.
Mixing: Pour 5% (20: 1) MoCool in 95% distilled water.
Do not use the product pure.
Can be mixed with most monoethylene glycol based coolants.

PROPERTIES

Visual Color Purple
Density at 20 ° C / 68 ° F ASTM D1122 1.058
pH ASTM D1287 9.4