- Pack

Banner
You've all been waiting for it… The big kit that will finally make your 125cc YAMAHA N-MAX or MBK OCITO 155/150 maxi scooters roar! Here it is, the famous Ø63mm kit which is also delivered with the multi-curve electronic calculator As usual MALOSSI has made a powerful, solid, torquey and very high-end kit. This little monster will project your displacement from 125cc to 182.58cc real extreme performance. MALOSSI has for this thermal group found the perfect race / diameter ratio, this cylinder will be easily supported by your original crankshaft. It is already running in competition and in endurance, so that means it has been tested... Force Master 2 is the electronic box that allows you to change the injection to adapt perfectly to the new Malossi 4t thermal group. This box has been programmed with different programs in order to be coupled perfectly to your vehicle, whatever its configuration! With this box 4 curves are offered to you…
- curve 1: best performance with the original cylinder
- curve 2: Malossi cylinder and original exhaust
- curve 3: Malossi cylinder and modified exhaust
- curve 4: electronic unit excluded
Let's see now rather how MALOSSI did to increase the performance of the high engine, it obviously did not stop increasing the diameter of the piston cylinder! Here are the technical characteristics of the kit:
Cylinder
Bore: Ø 63mm; Stroke: 58.6mm;
Displacement: 182.58; Compression ratio: 10.6:1.
• Material: primary aluminum alloy with high silicon content
quenched and tempered, cylinder liner with application of carbon carbides
silicon in a galvanic nickel matrix and cross-smoothing by
two diamond passes, with very strict tolerances
• Machining: by high precision CNC machine tools
• Cylinder-piston couplings with coupling tolerance of 0.05
mm
• Recalculated and enlarged heat exchange surfaces
Piston
• Extra compact with three segments
• Material: special aluminum alloy with a high silicon content a
low thermal expansion with application of tin on the walls of
sliding
• Machining by CNC machine tools
• Lightened and strengthened
• Enlarged heat exchange surfaces
Segments
• Specials with high sliding and very high mechanical resistance
• 1st compression segment in nitrided and chromed steel
• 2nd segment in special cast iron
• Three-piece scraper ring made of special steel, chrome-plated
With this kit you are therefore in position of an ultra robust, powerful and safe equipment! No more soft accelerations, limited top speeds… Disappointing pick-ups! Attention, this kit is still not to be put in just anyone's hands... Informed pilot!
Mounts on ( MALOSSI list):
MBK OCITO 150 / 155 EURO 3 and EURO 4
YAMAHA N-MAX 150 / 155 EURO 3 and EURO 4
Reference: 3413216
Replacement MALOSSI piston upscale with 4 sizes of wear available to choose from!
Reference: 1113280B
Pack seal essential for a leak-free reassembly of your high engine MALOSSI.
Reference: 3511204B
Mandatory Segments of replacement for any maintenance or in case of loss of compression of your kit high Ø63mm, MALOSSI 185cc engine.
Reference: 3611263
Ideal for the refurbishment of your engine.
Reference: 2312422
Replacement spindle reinforced MALOSSI Ø14mm X internal diameter 8mm X length 47mm.
Reference: 5519537
An electronic unit which allows you to adjust your injection with 4 different programs. Guaranteed performance gain and increased engine reliability EURO 3 before 2017 only!
€299.99
€275.990
|
delete
|
||
The product is no longer available in this quantity.
|
€241.660
|
delete
|
||
The product is no longer available in this quantity.
|
Reference: 032300
Ideal for a refurbishment of your maxi-scooter 125cc 4 times.
Reference: 166.0115
Very good aluminum kit for YAMAHA CYGNUS 125cc injection, delivered with its engine reprogramming box! Couple and power at the top!
Reference: 02125952
Ideal for a refurbishment of your maxi-scooter, motorcycle 125cc while offering 15% more power.
Reference: 9929380
The famous POLINI in cast iron, very robust and torquey! For carburettor engine!
Reference: 030316
Complete cylinder for a refurbishment of your original engine at a lower cost!
Reference: 3114852 + 5519524
Enough to maximize the performance of your YAMAHA X MAX 125 IE 4T LC EURO 4 from 2017 to 2020 !!
Reference: 030316C
High original type motor at very low price for your 250cc 4T scooters.
Reference: 3117968 + 5518172
Enough to increase the performance of your N-MAX 150 and 155 as much as possible... EURO 3 or EURO 4
Reference: 3114851
Kit with high performance box for YAMAHA 125 4T scooters.
Reference: 3113025
A powerful kit with a lot of torque. What just to have fun on the track.
Reference: 3117968 + 5519527
Enough to increase the performance of your N MAX and X MAX 125 in EURO 5 as much as possible
Reference: 3114852
Enough to make your 125cc 4T motorcycle with a minarelli engine such as the HUSQUVARNA SMS, RIEJU MARATHON, BETA RR ...
Reference: 166.0100
The famous POLINI cast iron, very robust and torquey! For carburetor engine!
Reference: 02125852
Ideal for refurbishment of your maxi-scooter, 125cc motorcycle while offering more power.
Reference: 3114268
What to increase the maximum performance of your X-MAX, X-CITY, CITYLINER ...
Reference: 9925180
A complete kit to dramatically optimize performance.