Reference: 5491
BUZZETTI universal puller 2 screws 5mm thread center distance 30 to 52mm
A universal puller recommended for SUZUKI, MINARELLI, MORINI but also for all internal rotor ignitions.
Banner
Attention, only reserved for the competition, the circuits ... Prohibited on open road!
Here is the ignition of ITALKIT ANALOGIC competition for motor 125cc 2T motorcycle SACHS all models ... This ignition does not have 12v output (it is therefore without power for lighthouse, pump or other). For the manufacture of this ignition, ITALKIT has put with a major asset, the brand SELETTRA, these ignitions are already used for the competition by MALOSSI MHR or PARMAKIT.
So this is an ignition internal analog rotor (advance fixed) of very high quality, it is really very powerful, solid and well balanced to avoid vibration. It will allow you really great performance, we also prefer this model to fixed analog PVL models.
It comes complete with the machined plate mass, the high voltage coil that has a high voltage cable, the rotor, the stator, hardware, a braid mass ... But also the instructions. Otherwise, to have a circuit breaker, it is very simple, a cable comes out of the coil, just plug it on circuit breaker, neman, to the mass ... This ignition is stalled at 18 ° (1.4mm) before TDC "top dead center") with a tiller.
ITALKIT guarantees that this ignition follows the stability up to 27 000 revolutions per minute. Clearly, this ignition will be perfect on large configurations, not too pushy either, after it is better to pass on the variable which guarantees a follow-up in the higher regimes without loss of torque thanks to the self-shift according to the regime engine.
Mounts on motorcycle 125cc SACHS 2T all models!
Reference: 5491
A universal puller recommended for SUZUKI, MINARELLI, MORINI but also for all internal rotor ignitions.
Reference: ES.001
PARMAKIT spare stator for your PARMAKIT ignition!
Reference: EB.001
High quality and guaranteed performance, SELETTRA ITALKIT ignition coil for analog ignition with fixed advance on moped, mécaboite and scooter.
Reference: EE.KZD.01.2511
Save seconds on the clock thanks to the very high performance ignition new version ITALKIT by SELETTRA, delivered complete with variable advance!
Reference: EE.KZA
Universal Ignition ITALKIT by SELETTRA Fixed advance. New high performance model. To be adapted by machining the center of the rotor and manufacturing a plate!
Reference: 18618
Ideal in case of loss or breakage of your old original key.
Reference: EE.001.26.1
Reliability and performance guaranteed for your BULTACO 2T vintage motorhoes and motorized tillers.
Reference: EV2.01.25.1
Concentrated technology for assured performance on your motorcycle 125cc Aprilia, Rotax 122 engine with the ignition programmed chip interchangeable and variable advance!
Reference: 311465 / 31146
Rotor + stator + plate kit with cable for CAGIVA 125cc 2T motorcycle.
Reference: EV2.01.60
The must of internal rotor ignitions which in addition to having a very strong spark and no engine rev limit, the curves can be modified just by changing the electronic chip, arises on HUSQVARNA 125cc 2T engines!
Reference: EE.001
ITALKIT by SELETTRA universal ignition. To be adapted by machining the center of the rotor and manufacturing a plate!
Reference: EE.001.25.1
Concentrated technology for guaranteed performance! 125cc Rotax engine on your 122!
Reference: EE.KZD.1
ITALKIT by SELETTRA universal ignition. New high performance models. To be adapted by machining the center of the rotor and manufacturing a plate!
Reference: EE.002.09
A concentrate of technology for guaranteed performance! on your 125cc TM and GAS GAS 2T all models!
Reference: EE.002.42
A concentrate of technology for guaranteed performance! on your 125cc CAGIVA MITO and other 125 CAGIVA!
Reference: EV2.001
Universal ignition ITALKIT by SELETTRA. To be adapted by machining the center of the rotor and by manufacturing a plate! Double curve version with selection switch!
Reference: EE.001.20
A concentrate of technology for guaranteed performance! on your 125cc and 200cc BULTACO 2T all models!
Reference: EV2.01.22
The must of internal rotor ignitions which in addition to having a very strong spark and no engine rev limit, the curves can be modified just by changing the electronic chip, arises on MONTESA 2T engines.
Reference: EV2.02.09
Concentrated technology for assured performance on your GAS GAS 125cc 2T (all models) with this chip programmed ignition interchangeable and variable advance!