- Pack
Reference: LB05EMH / 8338
Anti-parasite NGK LB05EMH 5kΩ resistance for candle with olive (compact silicone model)
Small compact model in quality silicone, for candle with olive, NGK LB05EMH.
Banner
*Please consider adding your ignition nut if necessary, it is not in the pack because it exists in steps to the left, not to the right and toothed for the kick machines!
Ideal to start new without any problems, this ignition is the luxury version with setting markers, forged rotor center..., it is 100% complete, we deliver it with ignition CDI, high voltage coil, keyboard, voltage regulator, anti-parasite NGK LB05EMH, B8HS candle, also supplied with its two M5 X 30mm fixing screws reinforced to mount LOCTITE with a torque clamp at 6.8nm
This is the radical and not so expensive solution to solve all ignition problems on your MBK 51 with electronic ignition, or to switch your MOTOBECANE with AV10 / AV7 motor to switch, in electronic ignition machine.
Ignition setting board:
On AV7 motor without valves: 1.6mm (high speed prepared engine), 1.8mm (medium speed prepared engine) 2mm (original engine)
On AV10 motor with valves1.5mm (original or poorly prepared engine), 1.4mm (engine prepared medium speeds), 1.3mm (high speed engine).
Calibration recommended strobe lamp. Or compare.
*Be careful, the higher the lead and the higher the compression rate, the more careful it is to have a high octane in the fuel, and not to put too much oil to avoid lowering this rate!
Reference: LB05EMH / 8338
Small compact model in quality silicone, for candle with olive, NGK LB05EMH.
Reference: 276981
A good quality original type part much less expensive than the original.
Reference: 283664
Spare CDI unit for your MBK 51.
Reference: 270285
A piece cheaper than the original but of very good quality.
Reference: 489602
Spare part essential in case of loss, wear ... of your old nut!
Reference: 173.0002
The must of calibration wedges. It is ultra precise and will facilitate the assembly of your ignition.This tool also allows the control of parts!
Reference: 502028
Hexagonal ignition nut ideal in case of breakage or wear for a good quality and safe reassembly.
Reference: 506270
Ignition rotor nut 11x100mm not to the right for MBK 51 moped.
€4.160
|
delete
|
||
The product is no longer available in this quantity.
|
€12.490
|
delete
|
||
The product is no longer available in this quantity.
|
€4.990
|
delete
|
||
The product is no longer available in this quantity.
|
€4.990
|
delete
|
||
The product is no longer available in this quantity.
|
€14.160
|
delete
|
||
The product is no longer available in this quantity.
|
€0.830
|
Size
delete
|
||
The product is no longer available in this quantity.
|
€0.830
|
delete
|
||
The product is no longer available in this quantity.
|
€83.330
|
delete
|
||
The product is no longer available in this quantity.
|