- Pack
Reference: 276981
Voltage regulator for Peugeot 103 SPX, RCX, CLIP, MVX, FOX ... MBK 51 ...
A good quality original type part much less expensive than the original.
Banner
*Please note, remember to add your ignition nut if necessary, it is not in the pack because it exists in left-hand, right-hand and toothed versions for kick machines!
Ideal for starting fresh without any problems, this CGN ignition is of good quality, it is 100% complete, we deliver it with ignition CDI, high voltage coil, key, voltage regulator, NGK anti-parasite.
This is the radical and not so expensive solution to resolve all ignition problems on your MBK 51 with electronic ignition, or to convert your MOTOBECANE with AV10 / AV7 engine to a breaker, into a machine with electronic ignition.
Ignition timing advice :
On AV7 engine without valves : 1.6mm (engine prepared for high speeds), 1.8mm (engine prepared for medium speeds) to 2mm (original engine)
On AV10 engine with valves : 1.5mm (original or poorly prepared engine), 1.4mm (prepared medium speed engine), 1.3mm (high speed engine).
Recommended timing of the strobe light . Or to the comparator.
*Attention, the higher the advance and the compression ratio, the more careful you must be to have a high octane in the fuel, and not to add too much oil to avoid lowering this ratio!
Reference: 276981
A good quality original type part much less expensive than the original.
Reference: 283664
Spare CDI unit for your MBK 51.
Reference: 270285
A piece cheaper than the original but of very good quality.
Reference: LB05E / 8031
Resistive standard model for candle with olive, NGK LB05E.
Reference: LB05F / 8051
Standard resistive model for candle without olive, NGK LB05F.
Reference: 14000014
Out of production.
Reference: 55 7180
Out of production !!!
Reference: PREM 01
A light, solid and efficient ignition. Ideal to accompany a prepared engine configuration. Complete ready for assembly. Adaptable without problems on AV7!
Reference: EE.001
ITALKIT by SELETTRA universal ignition. To be adapted by machining the center of the rotor and manufacturing a plate!
Reference: 185006
Ideal in case of wear of your ignition to repair your machine at a lower cost.
Reference: EE.KZD.1
ITALKIT by SELETTRA universal ignition. New high performance models. To be adapted by machining the center of the rotor and manufacturing a plate!
Reference: 14000114
Out of production.
Reference: 467731
Original type ignition. Perfect to start afresh.
Reference: DD25
The best ignition on the market. It improves the ignition curve and provides 2 sparks per revolution!
Reference: EXT100
Ideal for increasing your performance while preserving your lighting, two models to choose from: for starting with the kickstarter or with the stroller & pedal.
Reference: DD01
The best ignition of the market. It improves the ignition curve and provides 2 sparks per revolution!
Reference: 5519568
A very efficient ignition which preserves good inertia thanks to its external rotor system.
Reference: EE.KZA
Universal Ignition ITALKIT by SELETTRA Fixed advance. New high performance model. To be adapted by machining the center of the rotor and manufacturing a plate!
Reference: pack_allumage_51_luxe
Ignition type original version LUXE complete with antiparasite, keyboard, cdi, high voltage coil. Perfect for a fresh start.
Reference: EV2.001
Universal ignition ITALKIT by SELETTRA. To be adapted by machining the center of the rotor and by manufacturing a plate! Double curve version with selection switch!
€4.160
|
delete
|
||
The product is no longer available in this quantity.
|
€4.990
|
delete
|
||
The product is no longer available in this quantity.
|
€36.660
|
delete
|
||
The product is no longer available in this quantity.
|
€4.990
|
delete
|
||
The product is no longer available in this quantity.
|
€14.160
|
delete
|
||
The product is no longer available in this quantity.
|
€5.830
|
delete
|
||
The product is no longer available in this quantity.
|
€0.830
|
delete
|
||
The product is no longer available in this quantity.
|