
Reference: 2111727B
Stainless steel fastening clamp for muffler MALOSSI MHR Ø60mm
Stainless steel necklace MALOSSI MHR for competition muffler MALOSSI MHR 60mm in diameter.
Banner
Here is the pot MHR TEAM! This pot is studied on the run and is used for trophy race MALOSSI 70cc scooter. It allows especially a big performance gain in medium and high speed. This jar is sealed with a special steel 8 / 10mm thickness welded TIG and MIG. It is of course oxyacetylene welded folded hand by craftsmen. In addition to being powerful it has a neat aesthetic side thanks to its magnificent exposed seams, a dough attachment molded aluminum with the brand logo, a bright high end varnish extra .... A silent satin anodized aluminum blue night ...
Warning, this exhaust is mounted only on the aluminum cylinder. H2O 7T MHR TEAM!
Description MALOSSI:
The new range of MHR pot has been studied by CAD systems and defined for each 50cc scooter. After very severe tests in the Malossi Engineering test room, equipped with the most modern and sophisticated equipment, the research and development department engineers were able to improve the performance of different vehicles. The MHR exhaust systems address a sporting and demanding customers, they personalize your scooter with elegance and with a powerful sound, completing the thermodynamic cycle of the famous Malossi MHR. POT SCOOTER RACING "The race muffler born in the race for the race" is one of the essential components intended for MALOSSI SCOOTER 70cc trophy, specially designed to give the engine a good increase in power at medium and high regimes. Malossi Trophies are conducted worldwide according to specific formulas that provide regulations combinations MALOSSI special products for each category in order to obtain consistent and optimal results between competitors through the use of the technology advanced. With the SCOOTER RACING pot Malossi expands its range of trophy exhaust systems, that represents the highest performances in the sector. Another initiative Malossi to provide opportunities for youth to practice sports in the world of two wheels to become the drivers of the future.
SPECIFICATIONS:
POT special steel exhaust (8/10 mm thick), robotic TIG and MIG welding and manual welding oxyacetylene folded craftsmen. Transparent varnish.
SILENT aluminum with satin finish.
Ø47.6mm
Itself on:
Make Model
Aprilia Aprilia SR (carb.) 50 LC 2T 2004-> (Piaggio)
CONNECTING WITH ONLY gr.therm. 3115142 / .T0
Aprilia Aprilia SR R (carb.) 50 2T LC (Piaggio)
CONNECTING WITH ONLY gr.therm. 3115142 / .T0
Aprilia Aprilia SR 50 Street 2T LC euro 2
CONNECTING WITH ONLY gr.therm. 3115142 / .T0
Derbi Derbi GP1 50 2T LC
CONNECTING WITH ONLY gr.therm. 3115142 / .T0
Derbi Derbi GP1 OPEN 50 2T LC
CONNECTING WITH ONLY gr.therm. 3115142 / .T0
Derbi Derbi GP1 REVOLUTION LC 50 2T
CONNECTING WITH ONLY gr.therm. 3115142 / .T0
GILERA GILERA DNA 50 2T LC
CONNECTING WITH ONLY gr.therm. 3115142 / .T0
GILERA GILERA RUNNER SP 50 2T LC <-2005
CONNECTING WITH ONLY gr.therm. 3115142 / .T0
GILERA GILERA RUNNER SP 50 2T LC 2006-> (C451M)
CONNECTING WITH ONLY gr.therm. 3115142 / .T0
GILERA GILERA RUNNER 50 2T LC
CONNECTING WITH ONLY gr.therm. 3115142 / .T0
MALOSSI MALOSSI C-ONE 5715844 50 2T LC (Piaggio-ruota 12/13)
CONNECTING WITH ONLY the gr.therm. 3115142 and 3115142.T0
PIAGGIO PIAGGIO NRG EXTREME 50 2T LC
CONNECTING WITH ONLY gr.therm. 3115142 / .T0
PIAGGIO PIAGGIO NRG MC2 50 2T LC <-1997
CONNECTING WITH ONLY gr.therm. 3115142 / .T0
PIAGGIO PIAGGIO NRG MC2 50 2T LC 1998->
CONNECTING WITH ONLY gr.therm. 3115142 / .T0
PIAGGIO PIAGGIO NRG 50 2T LC
CONNECTING WITH ONLY gr.therm. 3115142 / .T0
PIAGGIO PIAGGIO NRG MC3 DD 50 2T LC
CONNECTING WITH ONLY gr.therm. 3115142 / .T0
PIAGGIO PIAGGIO NTT 50 2T LC
CONNECTING WITH ONLY gr.therm. 3115142 / .T0
PIAGGIO PIAGGIO NRG Power DD 50 2T LC
CONNECTING WITH ONLY gr.therm. 3115142 / .T0
PIAGGIO PIAGGIO QUARTZ 50 2T LC
CONNECTING WITH ONLY gr.therm. 3115142 / .T0
PIAGGIO PIAGGIO ZIP SP 50 2T LC 2001->
CONNECTING WITH ONLY gr.therm. 3115142 / .T0
PIAGGIO PIAGGIO ZIP SP 50 2T LC <-2000
CONNECTING WITH ONLY gr.therm. 3115142 / .T0
Reference: 2111727B
Stainless steel necklace MALOSSI MHR for competition muffler MALOSSI MHR 60mm in diameter.
Reference: 1411728B
An already preformed wool for pot MALOSSI with the cartridge Ø60mm.
Reference: 2513158BA
Ideal in case of wear, cracks or breaks in your old room.
Reference: 1816685B
Silentbloc for your exhaust MHR BIGBORE 3
Reference: 31659R
Ideal to accompany a configuration origin, approved exhaust.
Reference: 31601RK
An exhaust studied for the engines of origin, 50cc pushed and small kit 70cc.
Reference: 31558R
Ideal to accompany a configuration origin, approved exhaust.
Reference: 200.0287
A powerful pot granted to 94cc from POLINI.
Reference: 31620R
Ideal to accompany an original configuration, homologated exhaust.
Reference: 3219490
An exhaust for senior competition engines kits!
Reference: 57505.08
A high-end exhaust with guaranteed performance accompanied by a prepared 80cc configuration!
Reference: 200.0407
A racing exhaust of high quality, approved for PIAGGIO ZIP!
Reference: 3216988
A small high quality pot with the coolest aluminum silencer. Ideal to accompany an original configuration or small 50cc kit.
Reference: TFAST003
Competition exhaust for your scooter PIAGGIO, GLIERA...
Reference: 473230
Original type, ideal for refurbishing no problem!
Reference: 3216582
A MALOSSI exhaust for your PIAGGIO / GILERA 50cc, a pretty pot, powerful and solid in addition to being approved!
Reference: 3217172
A MALOSSI exhaust for your PIAGGIO / GILERA 50cc, a pretty, powerful and solid pot in addition to being homologated!
Reference: 31644P2
A small high quality pot with the coolest aluminum silencer. Even arises on the new models 2019/2019/2020 ...
Reference: R0035
Special pot for GILERA DNA, also exists in double outlet and chrome version!
Reference: 31633P2
A small pot of high quality with aluminum silencer more fun. Ideal to accompany a configuration origin or small kit 50cc.