Reference: 214537
Complete fixing kit with ball joint, springs, rod, screws for DOPPLER ER1 pot on MBK 51 square arm
A complete kit to refurbish your DOPPLER ER1 muffler on MBK 51 square arm!
Banner
Here is the muffler DOPPLER model ER1 for MBK 51. This good quality exhaust has a nice look, performance at the height and a fair price. The body is a real rolled welded sheet 1.2mm chrome finish. The sheet is of good quality, volumes, shapes, counters cones ... Are well studied!
This pot works very well on an original cylinder and small 50cc kits (DOPPLER ER1, BIDALOT G1 Replica, AIRSAL T6, engine fox ...), it will not offer good performance on very sharp engines (from its sheet much too thick) nor on engines of large displacement (due to its architecture and its volume).
We would say that the diagrams adapted to this exhaust go from 178 to 185 ° maximum, with a power regime of 9000rpm maximum. This exhaust is really strong and very quiet with its absorption cartridge filled with ceramic wool. It comes with fasteners and all accessories.
Level look, it is really nice and racing, it is obviously delivered with a certificate of approval, it is clamped at the entrance of the ball joint, be careful, if you remove the input washer is no longer approved road.
To close, this exhaust has a very racing look like GIANNELLI SPORT and NINJA G2 Replica for example, it is really not noisy and very solid, it will fit with a small configuration type kit 50cc, carburation 15 to 17 , 5mm, dimmer ... However it will not follow on the 70cc and big kits 50cc has big diagrams. Really a very good pot to roll every day.
Reference: 214537
A complete kit to refurbish your DOPPLER ER1 muffler on MBK 51 square arm!
Reference: 195283
Ideal for reappearing your exhaust system DOPPLER, GIANNELLI or other on 103, 51 ...
Reference: 195250
A high-end silencer that mounts on DOPPLER ER1 pot or other models (GIANNELLI ...).
Reference: 450360
Ideal in the event of a leak or noise in your silencer and exhaust.
Reference: 4097
A certified pot quiet and discreet. Ideal to keep the look and sound of origin.
Reference: 489627
Very good rolled welded exhaust for MBK 51. Ideal for 50cc pushed kit and small 70cc. Special edition carbon version!
Reference: 10072P-C
High performance "special" exhaust, in its chrome version, particularly tuned to original engines and small kits! Mounts on MBK 51, MOTOBECANE with AV7 engine, AV10 ... Mounts even in combination of starter pedals!
Reference: 10072-P
"Special" high performance exhaust, particularly tuned to original engines and small kits! Mounts on MBK 51, MOTOBECANE with AV7, AV10 engine... Mounts even in combination with starter pedals!
Reference: S704360
Out of production !!! Racing exhaust high quality, limited quantity produced since the 1990s!
Reference: 30917
Rare, beautiful, and powerful Supeer especially engine combination that speaks to high rpm!
Reference: 4532
More efficient than the original, very good quality and very quiet!
Reference: 10072G-C
High performance exhaust CHROME version, particularly tuned to 70cc kit couplings! Mounts on MBK 51, MOTOBECANE with AV7, AV10 motor ... Mounts even in combination with starter pedals!
Reference: 98560
Out of production.
Reference: 96560
Out of production.
Reference: 4578
Out of production.
Reference: EC25
COMPETITION exhaust for MBK 51 / MOTOBECANE with square arm.
Reference: 4210
A pot with the original type look which still allows a performance gain compared to the origin.
Reference: 10072-G
High performance muffler, particularly tuned to 70cc kit couplings! Mounts on MBK 51, MOTOBECANE with AV7, AV10 motor ... Mounts even in combination with starter pedals!
Reference: 15000510
Outside productuction.