- -10%
Reference: 214537
Complete fixing kit with ball joint, springs, rod, screws for DOPPLER ER1 pot on MBK 51 square arm
A complete kit to refurbish your DOPPLER ER1 muffler on MBK 51 square arm!
Banner
Here is the DOPPLER exhaust model ER1 carbon edition for MBK 51. This good quality exhaust has a nice look, high performance and a fair price. The body is a real rolled welded in 1.2mm sheet metal with a varnish finish.
The sheet metal is of good quality, the volumes, shapes, counter cones… Are well studied! This pot works very well on an original cylinder and on small 50cc kits (DOPPLER ER1, BIDALOT G1 Replica, AIRSAL T6, fox engine ...), it will not offer good performance on very sharp engines (from a its sheet too thick) nor on large displacement engines (due to its architecture and volume).
We would say that the diagrams adapted to this exhaust go from 178 to 185 ° maximum, with a power regime of 9000rpm maximum. This exhaust is really solid and very quiet with its absorption cartridge filled with ceramic wool. This version has a real carbon silencer in order to lower the weight as much as possible and to give a beautiful aesthetic side! It comes with fixings and all accessories. Look level, it is really nice and racing, it is obviously delivered with an approval certificate, it is clamped at the entry of the ball joint, be careful, if you remove the entry washer it is no longer road approved.
To close, this exhaust has a very racing look like the GIANNELLI SPORT and NINJA G2 Replica for example, it is really not noisy and very solid, it will adapt with a small configuration type 50cc kit, carburation 15 to 17 , 5mm, variator… However it will not follow on 70cc and large 50cc kits with large diagrams. Really a great pot to roll every day.
Reference: 214537
A complete kit to refurbish your DOPPLER ER1 muffler on MBK 51 square arm!
Reference: 195283
Ideal for reappearing your exhaust system DOPPLER, GIANNELLI or other on 103, 51 ...
Reference: 450360
Ideal in the event of a leak or noise in your silencer and exhaust.
Reference: 4210
A pot with the original type look which still allows a performance gain compared to the origin.
Reference: 50145CR
New, a chrome version of the SIMONINI pot for MBK 51, AV10, motobecane, AV7, AV88, 40 ...
Reference: 3219057
A very good MALOSSI VT exhaust, solid and efficient, we will greatly appreciate its volumes!
Reference: 493897
Very good muffler rolled welded with chrome finish for MBK 51. Ideal for kit 50cc pushed and small 70cc.
Reference: 205560
Out of production !!!
Reference: 10072P-C
High performance "special" exhaust, in its chrome version, particularly tuned to original engines and small kits! Mounts on MBK 51, MOTOBECANE with AV7 engine, AV10 ... Mounts even in combination of starter pedals!
Reference: 4578
Out of production.
Reference: 4532
More efficient than the original, very good quality and very quiet!
Reference: 30917
Rare, beautiful, and powerful Supeer especially engine combination that speaks to high rpm!
Reference: 30927
A very good little exhaust, solid and efficient, we highly appreciate its volumes!
Reference: EC27
A very good exhaust ideal for engines with low diagrams!
Reference: 187111
Very good rolled welded exhaust for MBK 51. Ideal for 50cc pushed kit and small 70cc.
Reference: S704360
Out of production !!! Racing exhaust high quality, limited quantity produced since the 1990s!
Reference: 4097
A certified pot quiet and discreet. Ideal to keep the look and sound of origin.
Reference: 528255
Exhaust body with silencer to adapt!
Reference: 10072G-C
High performance exhaust CHROME version, particularly tuned to 70cc kit couplings! Mounts on MBK 51, MOTOBECANE with AV7, AV10 motor ... Mounts even in combination with starter pedals!