
Reference: 483805
Copper seal plug drain gearbox on mécaboite minarelli am6
Ideal for a perfect seal on your gearbox am6!
Banner
Completed the problems of slipping over the big powers!!!!
Excellent quality, under the brand name TOP PERFORMANCES. This Racing clutch kit includes all the accessories presented, i.e. nuts, reinforced springs, reinforced discs with interlayers (smooth discs) and red pressure flask.
Use of a garnished disc, steel disc and an additional spring compared to the original.
Thanks to the use of 5 springs , we obtain a better distribution of the pressure. The pressure flask and pusher are made of aluminium alloy with a specific heat treatment to optimize cooling during frictions and avoid the risk of heating therefore a better dissipation of heat.
The pressure flask is anodized in red colour, its thickness is 40 microns and the hardness of the surface is higher a 500 HV, the surface of the friction material was also increased by 25%.
In other words, with all these developments, we aim for performance and longevity on this Racing clutch kit from TOP PERFROMANCES!
A real concentration of technology, competition parts that do not require any modification when mounting on your Minarelli AM6 engine mecaboite because they install without any problem instead of the original parts.
Gets on:
Any MINARELLI AM6 engine ...
As a reminder:
- The oil used must be of the special 10W30 for gearbox with oil bath clutch, it must be between 0.75 and 0.85L.
- The gearbox discharge screw of the minarelli am6 engine tightens to 1.8mdaN torque
- Transmission cover screws tighten with 1.1 mdaN torque
- The counter nut of the presser tray with a torque of 2.7 mdaN
- The 4 screws of the pressure tray (clutch springs) with a torque of 0.5 mdaN
- The clutch nut with the folding puck and the crankshaft nut that keeps the 2 pinions at a torque of 7.5 mdaN.
Reference: 483805
Ideal for a perfect seal on your gearbox am6!
Reference: 9918550
The TOP PERF primary transmission in straight teeth with clutch for 50cc motorcycles with minarelli am6 engines. Performance gain!
Reference: 22383
A complete quality package for a fresh start while strengthening your clutch.
Reference: RE1
Racing springs to avoid having a slipping clutch, VOCA quality guaranteed.
Reference: 494806
A transmission kit delivered with its clutch plates for mécaboite type am6.
Reference: 164407
A cheap and good quality original type cable.
Reference: 32410343
Harder springs than the original to prevent your clutch from slipping. These springs are often used in competition.
Reference: 9920580
Ideal for strengthening your clutch! Competition springs for minarelli am6 engine.
Reference: EMB01
A reinforced clutch which will allow you a more frank grip and a slower wear. Ideal to accompany a 50cc push or 70cc kit.
Reference: 228.0105
Ideal for a harder clutch which therefore slips less.
Reference: 458203
Good quality and original type, much cheaper than in concession.
Reference: 519351
A transmission kit delivered with its clutch die for MINARELLI AM6 engine mecaboite.
Reference: OE-AM5WX-E6351-10
Essential element for the proper functioning of the clutch!
Reference: 800545
A mineral oil for hydraulic clutch containing 125ml.
Reference: OE-AM90201-108L9
Am6 engine drum round.