Reference: 0713233B
replacement flange for kit admission MALOSSI d.21 and 28mm MALOSSI MHR am6 / derbi
Bride spare inlet, ideal for any loss or breakages!
Banner
After the C-ONE, here is the latest addition to the MHR MALOSSI range ...
The RC-ONE which coupled with the 94cc kit , the power given is more than 30hp!
Designed to be used only with the latter, for example on the complete engine you can install a long stroke crankshaft without any modifications.
Thanks to this crankcase, you can fit both drum brakes and disc brakes.
A housing specially designed for the Malossi MHR and MHR TEAM internal rotor ignition has been designed to fit perfectly with the crankcase.
You will no longer have separate lubrication and the crankcase is already ready to accommodate the new large MALOSSI valves allowing you to optimize your machine.
Technical characteristics :
- Housing torque, high mechanical strength silicon aluminum alloy die-cast material.
-Carters fitted with 5,150 Kg bearings.
- Crankshaft center distance, clutch shaft 270 mm.
- Motor shaft bearings 20 x 47 x 14.
-FKM - PTFE oil deflectors.
-VL 18 lamellar valve.
-Pipe X360 Ø 21 - 28 length 27.
- Cylinder studs material steel 8.8 in accordance with UNI EN20898 / 1.
-Cooling liquid increased connection: external ø 18 mm internal ø 13.5 mm.
-Pivot wheel.
- Wheel axle bearing 20 x 47 x 14.
-Gear roller case dimensions 16 x 22 x 12.
Mounts on the complete RC-ONE 94cc minarelli horizontal liquid engine (nitro, aerox, ...)
Reference: 0713233B
Bride spare inlet, ideal for any loss or breakages!
Reference: 2715810.C0
The famous MHR Vl18 valves! Guaranteed performance!
Reference: 1516211
Connection for cooling your MALOSSI MHR TESTA ROSSA kit.
Reference: 2615853E
Ideal for breakage or wear.
Reference: 2516232
Ideal for breakage or cracking.
Reference: 1016171
Ideal in case of breakage or loss.
Reference: 1313799B
MALOSSI MHR adjustable intake pipe connecting sleeve 28 to 30mm (Ø35 to 39mm fixing) minarelli horizontal (nitro, aerox).
Reference: 70350000
Replacement bearing for flywheel side secondary shaft on your scooters!
Reference: 2615853E
Ideal for breakage or wear.
Reference: PI130491
Ideal for refurbishing your gear/transmission part on PIAGGIO housing.
Reference: 029.2930
Ideal for having a clean and sealed engine even when removing the oil pump!
Reference: 170.0301
POLINI EVOLUTION black model racing transmission housing, ideal to accompany a push engine configuration.
Reference: 164577
A must have item for those who keep their lubrication separate with the engine oil tank for automatic mixing.
Reference: 170.0306
A very good housing of POLINI, with special system of maintenance of the axis of transmission back!
Reference: 170.0305
Lightweight aluminum housing with anti-bending system of the torque control shaft!
Reference: 171203 (ACSUD ONLY)
Ideal for personalizing your crankcase with the color of your choice.
Reference: 171123
A good quality pieces of kit that will give style to your scooter.
Reference: 451084
Ideal for the refurbishment of your engine casings.
Reference: 3VLE54210000
Original YAMAHA transmission casing for your MINARELLI Vertical / Horizontal scooter scooter (booster rocket, bw's, nitro, aerox, ovetto).
Reference: 489446
Ideal to have a clean and waterproof motor even when removing the oil pump!
Reference: 172.0016
A piece not to neglect especially on a pushed engine! Version 6mm.
Reference: 289067
Quality part to improve the aesthetics of your horizontal minarelli scooter!
Reference: 289068A
Essential aesthetic element for your scooter during runs, meetings ...!