Reference: 01486_72
Main Jet For DELLORTO Carburetor Small Pitch 5mm Thread 8mm Length Genuine (INC Certified)
Certified DELLORTO INC! Choose real DELLORTO quality!
Banner
Carburettor DELLORTO model PHVA US 17.5, with socket for separate lubrication, rigid mounting on horizontal flange 42mm center distance, version without choke with a reduced price! Intended to be installed on 50cc 2-stroke scooters KYMCO, HONDA, BSV .. .
Here is the Ø17,5mm PHVA US DELLORTO carburetor. This model is specific with its horizontal flange type assembly, equipped with a socket for separate lubrication (you do not have to use it), however it does not have an antifreeze circuit or a vacuum connection.
Another particularity of this carburetor is that it does not have a choke, it is up to you to put down your equipment or to equip yourself to accompany this PHVA with a cable, lever or automatic choke.
This PHVA carburetor is mainly intended for Kymco, HONDA Dio, Bali scooters ... and many other models. Its diameter for fixing the air filter is 35mm unthreaded. Its so-called horizontal fixing flange has a fixing center distance of 42mm, mounted on an O-ring for maximum sealing.
This low-cost carburetor is of very high quality and has a multitude of adjustments: richness screw, idle jet, needle valve ... It consumes relatively little provided it is properly adjusted! It offers much more performance than SHA type carburetors and is placed below the PHBG and other more advanced versions. In addition, unlike other PHVA this model has a chromed steel tank.
Technical summary and equipment present in this PHBN 17.5 US without starter :
-Main nozzle small standard pitch Ø5mm DELLORTO 90
- Needle A27 + circlips 2nd notch from the top
-209GN needle well
- 40 ° cutting bush
- Idle jet 35
-Mounting on flange horizontal center distance 42mm
-For 2-stroke engine
-With separate lubrication
-Diameter for air filter Ø35mm
-Connection for depression: no
-Antifreeze circuit: no
-Starter: not supplied (possibility of mounting a lever, cable or electric choke)
This carburetor with a horizontal flange mounting is mounted on the following 50cc 2-stroke scooters and directly on the intake system :
-BSV scooter 50cc 2 times
-HONDA Bali 50
-HONDA Dio 50 G
-HONDA Dio 50 SP
-HONDA Dio 50 SR
-HONDA SXR 50
-HONDA Dio 50 ZX (before 1995)
-HONDA Dio 50 ZX (after 1996)
-HONDA Lead 50-HONDA SFX 50
-HONDA SGX (Sky) 50
-HONDA SH 50 (before 1995)
-HONDA SH 50 (after 1996)
-HONDA Shadow 50
-HONDA SXR 50
-HONDA Vision 50
-HONDA Vision 50 Met In
-HONDA X8R-S 50
-HONDA X8R-X 50
-KYMCO scooter 50cc 2 times
Reference: 01486_72
Certified DELLORTO INC! Choose real DELLORTO quality!
Reference: 360.0003
Boxed jets, checked, certified for your DELLORTO SHA, PHBG carburettors and many others requiring Ø5mm.
Reference: 16250_1
Essential for tweaking your settings as much as possible and obtaining optimal operation of your engine. For DELLORTO PHBN and PHVA carburettors.
Reference: 11600_35
Indispensable for fine-tuning your settings or simply changing your idle jet.
Reference: 15349_00
Replacement valve spring only sold DELLORTO carburetor PHVA and PHBN.
Reference: 13681_00
Essential piece for any loss or breakages.
Reference: 13687_00
Ideal for any loss or breakage of your old media, plug socket on carburetor PHBN, PHVA.
Reference: 07526_00
Screw essential for maintaining your valve cover or choke carburettors DELLORTO PHBN, PHVA.
Reference: 53086_00
The complete idle screw for your PHBN, PHVA ... carburettors!
Reference: 53053_00
A complete kit at a low price, ideal for the maintenance of your carburetor PHBN, PHVA, PHVB ...
Reference: 13709_00
Indispensable for maintaining your tank on DELLORTO PHBN, PHVA carburetor.
Reference: 14056_00
The complete air control screw for your PHBN carburetors, PHVA, PHVB ...! Model with conical tip Ø2mm.
Reference: 15192_00
Spare essential in case of wear, loss or just to fine tune your carburettor DELLORTO PHVA.
Reference: 15422_00
Real piece of ideal replacement in case of breakage, wear ... certified DELLORTO carburetor PHVA.
Reference: 201.1701
An excellent high quality carburetor at a low price, with separate grease and vacuum sockets! Choice choke cable or lever!
Reference: 1231
The 17.5mm version of the DELLORTO PHBN BT, with socket for depression, antifreeze and separate lubrication, flexible mounting, cable choke! Ideal on scooter as on motorcycle 50!
Reference: 2613
The BS version of the 17mm PHBG. Version with special choke with large lateral lever, non-threaded, flexible air inlet and possibility of separate lubrication!
Reference: 477383
A carburetor with a good quality racing look better than a TNT for a relatively low price.
Reference: 466091
A good carburettor delivered with its automatic / electric choke
Reference: 1389
Carburettor DELLORTO PHVA TS model 17.5, taking for depression and separated greasing, flexible mounting version with antifreeze taken without starter, small price guaranteed!
Reference: 3067
The 17.5mm version of the DELLORTO PHBN LS, with socket for vacuum, antifreeze and separate greasing, flexible mounting, cable choke! Ideal on Booster Spirit, MBK Nitro ...
Reference: 1012
Carburettor DELLORTO model PHVA ED 17.5, with outlet for depression and separate lubrication, flexible assembly, version without choke with a reduced price, for installation of electric choke!
Reference: 473029
A good cheap carburetor much better than a TNT that will power your engine.
Reference: 478708
A carburetor much better than a TNT racing look that will power your engine without spending too much money.
Reference: 492301
An excellent carburetor PHVA 17,5mm in a choke lever! Comes with adjustable nozzles and cable elbow.
Reference: 201.1705
The most powerful version of the 17.5 POLINI CP carburetor! Delivered with a venturi tulip!
Reference: 201.1702
An excellent high quality carburetor at a low price, with separate grease and vacuum sockets! Comes with adapter for filter Ø34 to 36mm.
Reference: 2684
The DD version of the 17mm PHBG carburetor. Flexible, cable choke, large diameter inlet tulip and possibility of separate lubrication!
Reference: 1438
Carburettor DELLORTO model PHVA US 17.5, with socket for separate lubrication, rigid mounting on horizontal flange 42mm center distance, version without choke with a reduced price! Intended to be installed on 50cc 2-stroke scooters KYMCO, HONDA, BSV .. .
Reference: 462489
A carburetor much better than a TNT which will be able to feed your engine all this at low prices.