The dellorto carburetor D.19mm PHBG DS black racing edition is a carburettor PHBG reviewed and corrected by Italian technicians dellorto to obtain even better performance and allow a more simple adjustment. For example, the disassembly of the needle is no longer done by 2 screws but by an aluminum cap that can be unscrewed at the top and the nozzle can be disassembled without removing the tank, simply by removing the aluminum tank cap! This carburetor is of very good design and quality. The needle, float, bushel ... remain identical to normal PHBG. The alloy is him of better quality, the machining him also allows less bounces and better performances by its micro scratching and form of catch! We regret the lack of finishing and polishing side air filter. The tank is obviously made of aluminum.
Type of material :
Primary jet dellorto of 75 in small step ( to increase obligatorily in 80 before the first tests )
Needle : type W09
Cutting bushel : 30 degrees
Choke nozzle size 60
Idle jet size 45
Needle wells type AN in size 262
The starter is cable and carburettor type male.
Floater 4 grams
Outside diameter pipe side : 25mm
Outside diameter on the air filter side: 31mm without cover, and 40mm with the tulip cover provided (the assembly of this tulip is recommended).
In short it is an excellent carburetor well made and well thought for simple settings, good performance, low consumption; all in a racing aesthetic. It is a carburetor very used in competition, endurance and road thanks to these various possible and simple settings, the low price of these parts, its low comsomation, the ease to find repair parts and adjustments, its racing aesthetics. ..
Starter : with cable (possibility to pass it to lever)
Possibility of tap depression : yes but not required (delivered with shutter)
Separate greasing : yes but not required (delivered with shutter)
Spare parts and adjustment parts
.png)
.png)
