Reference: 370.0000
Box of 10 main jets for PWK, KEIHIN, POLINI CP ... certified / controlled carburettors
Very practical to have the most precise settings possible on your PWK, POLINI CP, KEHIN, FURYTECH, OKO carburettors ...
Banner
Here is the basic standard version of the CP type 17,5mm POLINI MOTORI, it is a high performance carburetor, made in Italy 100% and not in China, high quality that is easier to adjust!
This version is the standard, it has a separate grease outlet and a plug for depression, its choke is a lever pull cable model choices.
Basically, when you start on a carburettor POLINI CP, we already know that we buy a carburetor much lighter than a DELLORTO, with a much better anti-emulsion worked, a still aluminum tank, an extra ordinary finish, easier settings, an excellent system of anti-leakage needle valve float ...
This version is an excellent base for engines equipped or origin with a racing exhaust, it is simple to adjust and will be perfectly suitable for engine operating speeds up to 13000 maximum! For very high-powered engines that grow very high, an EVOLUTION version exists! You can change it as you wish with all the tuning accessories that we sell, large diameter tulips are also available for the installation of large-input filters and improve the venturi effect!
A tank with cap is also available for faster adjustment. The plug is a D / 24mm, cutting 30 °, nozzle 80. The needle is a CP 14 22, one after well in 2.6 -17.5! You'll understand, it's a powerful carburettor with a really nice price! 2 shutters are delivered to you if you do not want to use the sockets!
Summary of settings and options:
Options: plugs under the tank, special machining, large diameter tulip and Ø17,5mm settings and Ø22mm output (conical machining competition)
Mounting: Flexible for pipe diameter 25mm level fixation
Starter: cable or lever choices
Vacuum or separate greasing: Yes and yes
Main jet: POLINI CP 80
Needle: CP 14 22
Secondary sprinkler: POLINI 38
Bushel diameter 24mm cut 30 °
Parts after needle wells 2.6-17.5
Wealth: tightly moderately and loosely 0.5 turns (half a turn)
Air filter Ø46mm without tulip
For gasoline hose diameter 6mm (or 5 in forcing)
Needle clips in the middle on 3 notches
Reference: 370.0000
Very practical to have the most precise settings possible on your PWK, POLINI CP, KEHIN, FURYTECH, OKO carburettors ...
Reference: 343.0009
The gray racing version of the tank for CP POLINI carburettors.
Reference: 343.0011
Ideal for a refurbishment or in case of leak on your carburetor CP POLINI!
Reference: 343.0012
Ideal in case of breakage, loss, wear, the tank cap and its POLINI cap for your CP carbs!
Reference: 343.0013
Ideal in case of leak, for a refurbishment of your carbide POLINI CP with tank cap!
Reference: 343.0015
Ideal in case of loss, breakage ... The replacement cup for your carburettors POLINI CP.
Reference: 343.0700
Ideal in case of loss, breakage on your carburettor POLINI CP.
Reference: 343.0014
Ideal in case of wear, leakage or breakage in your carburetor Polini CP.
Reference: 343.0800
All sizes available, ideal for refurbishing or adjusting your POLINI CP carburettor.
Reference: 343.0400
The best to adjust or repair your POLINI CP carburetor!
Reference: 343.0016
Ideal to repair a worn carburetor, broken ... Delivered complete!
Reference: 343.0600
Ideal for adjusting your POLINI CP carburettors, or changing a worn needle!
Reference: 343.0004
Ideal for refurbishing your POLINI CP carburetor.
Reference: 343.0002
Ideal to refurbish your carburetor POLINI CP.
Reference: 343.0001
Ideal for refurbishing your POLINI CP carburetor.
Reference: 343.0019
A cable choke kit that mounts on all POLINI CP or PWK carburettors regardless of the brand !!!
Reference: 343.0338
Ideal for adjusting your POLINI CP carburettors!
Reference: 343.0022
The 90 ° tube kit, ideal in case of breakage or to change your straight assembly on your POLINI CP, PWK carburettors ...