Reference: 01486_72
Main Jet For DELLORTO Carburetor Small Pitch 5mm Thread 8mm Length Genuine (INC Certified)
Certified DELLORTO INC! Choose real DELLORTO quality!
Banner
Here is the Ø17,5mm PHVA ED DELLORTO carburetor. It has a separate lubrication outlet (you don't have to use it!), A vacuum, it has a choke lever and it is a flexible mounting male carburetor for female intake pipe or flexible sleeve. This PHVA carburetor will fit on your 103, MBK 51, mécaboites and scooters, it's up to you to adapt it. Its diameter for air filter is 32mm without thread, so you can install the air filters (or air box sleeve) in Ø 32mm!
This low-cost carburetor is of very high quality and has a multitude of settings: wealth screw, idle jet, needle valve ... It consumes very little when properly adjusted! It offers much more performance than SHA type carburetors…
Unlike rigid type carburetors, these types of flexible models absorb vibrations harmful to carburetion very well. Remember to check that your intake pipe accepts this carburetor, otherwise remember to buy intake pipe, sleeve ...
The carburetor is delivered as such:
- Main jet small standard pitch: 88
-A29 needle
-40 ° cutting bush
- Idle jet 30
-Choke nozzle 50
- Float in 2 grams
Reference: 01486_72
Certified DELLORTO INC! Choose real DELLORTO quality!
Reference: 16250_1
Essential for tweaking your settings as much as possible and obtaining optimal operation of your engine. For DELLORTO PHBN and PHVA carburettors.
Reference: 11600_35
Indispensable for fine-tuning your settings or simply changing your idle jet.
Reference: 13815_40
Ideal for lost or wear or just to set as accurately as possible your carburettor PHVA, PHBN ...
Reference: 13678_00
Real piece of ideal replacement in case of breakage, wear ... certified DELLORTO.
Reference: 13681_00
Essential piece for any loss or breakages.
Reference: 13687_00
Ideal for any loss or breakage of your old media, plug socket on carburetor PHBN, PHVA.
Reference: 07526_00
Screw essential for maintaining your valve cover or choke carburettors DELLORTO PHBN, PHVA.
Reference: 53086_00
The complete idle screw for your PHBN, PHVA ... carburettors!
Reference: 53053_00
A complete kit at a low price, ideal for the maintenance of your carburetor PHBN, PHVA, PHVB ...
Reference: 13709_00
Indispensable for maintaining your tank on DELLORTO PHBN, PHVA carburetor.
Reference: 13690_208
Spare essential in case of wear, loss or just to fine tune your carburettor DELLORTO PHBN, PHVA.
Reference: 14567_00
Full replacement cover for your DELLORTO PHVA carburetors.
Reference: 53029_00
Full idle screw for your DELLORTO PHVA carburetors.
Reference: 14056_00
The complete air control screw for your PHBN carburetors, PHVA, PHVB ...! Model with conical tip Ø2mm.