Reference: 01486_72
Main Jet For DELLORTO Carburetor Small Pitch 5mm Thread 8mm Length Genuine (INC Certified)
Certified DELLORTO INC! Choose real DELLORTO quality!
Banner
Carburettor DELLORTO PHVA TS model 17.5, taking for depression and separated greasing, flexible mounting version with antifreeze taken without starter, small price guaranteed!
Here Ø17,5mm carburettor DELLORTO PHVA TS. This model is equipped with a plug for the separate greasing (you do not need to use it) and the antifreeze circuit with depression is a flexible mounting with 24mm diameter mounting therefore a male carburettor to pipe d female admission or flexible sleeve.
The peculiarity of this carburetor is that it has no starter, you ask your hardware or equip you to accompany this PHVA with a rope starter, lever or automatic.
This carburettor PHVA will be installed without any problems on your 103, MBK 51, mécaboites and scooters, you adapt. Its diameter for fixing the air filter is unthreaded 35mm. It also has a specific tank with bleeder screw.
This carburettor at low prices is very high quality and has a wealth of settings: pilot screw, pilot jet, needle valve ... It consumes very little provided that it is well fixed! It offers more performance than SHA-type carburetors and is placed below the PHBG and other more advanced versions.
Unlike rigid type carburetors, these flexible models absorb very well the harmful vibrations for carburetion. Remember to check that your pipe of admission accepts this carburettor, otherwise think to buy intake pipe, sleeve ... for a perfect fit and operation.
Technical Summary and hardware in this PHBN 17.5 TS:
-Gicleur Main small step Ø5mm standard DELLORTO 80
-Aiguille A20 + 2nd notch clips from top
-Wells Of 209GA needle
Cutting -Boisseau 40 °
Idle -Gicleur 38
-Gicleur Starter 45
-Montage Of male kind, flexible Ø24mm
-For 2-stroke engine
-With Separate lubrication
-Diameter For air filter Ø35mm
-Fitting For depression: yes
Antifreeze -Circuit: yes
-Starter: Not provided
Reference: 01486_72
Certified DELLORTO INC! Choose real DELLORTO quality!
Reference: 360.0003
Boxed jets, checked, certified for your DELLORTO SHA, PHBG carburettors and many others requiring Ø5mm.
Reference: 16250_1
Essential for tweaking your settings as much as possible and obtaining optimal operation of your engine. For DELLORTO PHBN and PHVA carburettors.
Reference: 14671_208
Spare essential in case of wear, loss or just to fine tune your carburettor DELLORTO PHBN, PHVA.
Reference: 11600_35
Indispensable for fine-tuning your settings or simply changing your idle jet.
Reference: 13815_40
Ideal for lost or wear or just to set as accurately as possible your carburettor PHVA, PHBN ...
Reference: 15349_00
Replacement valve spring only sold DELLORTO carburetor PHVA and PHBN.
Reference: 13681_00
Essential piece for any loss or breakages.
Reference: 13687_00
Ideal for any loss or breakage of your old media, plug socket on carburetor PHBN, PHVA.
Reference: 07526_00
Screw essential for maintaining your valve cover or choke carburettors DELLORTO PHBN, PHVA.
Reference: 53086_00
The complete idle screw for your PHBN, PHVA ... carburettors!
Reference: 53053_00
A complete kit at a low price, ideal for the maintenance of your carburetor PHBN, PHVA, PHVB ...
Reference: 13709_00
Indispensable for maintaining your tank on DELLORTO PHBN, PHVA carburetor.
Reference: 53029_00
Full idle screw for your DELLORTO PHVA carburetors.
Reference: 14130_00
The complete air wealth screws for your PHBN carburetors, PHVA, PHVB ...! Model with conical tip Ø1,6mm.
Reference: 15391_00
Full replacement cover for your carburettors DELLORTO PHVA, angled 90 ° model.
Reference: 14699_00
Genuine spare part ideal in case of breakage, wear ..., DELLORTO certified Tank with integrated bleed screw supplied!