Reference: 370.0000
Box of 10 main jets for PWK, KEIHIN, POLINI CP ... certified / controlled carburettors
Very practical to have the most precise settings possible on your PWK, POLINI CP, KEHIN, FURYTECH, OKO carburettors ...
Banner
Here is the carburetor POLINI PWK 32mm very high quality type KEIHIN. Modified and controlled by POLINI, this carburetor features a lightweight aluminum alloy body, die cast and a clean and smooth finish reviewed by the brand.
Its intake tulip is specifically machined, reviewed and corrected to provide the best performance. The bushel is flat, this carburetor very short therefore has a very good engine, ideal especially on the exhaust bar.
This carburetor is engraved POLINI on both sides, it has a plug for vacuum valves, you do not have to use it. The presets (needle / well / sprinkler ...) are very good for powerful engines, very well prepared.
Clearly, this recovery of the carburetor at Polini is a model really high quality for large configurations on mécaboite 50cc, motorcycle 125cc 2 times, scooter ... which competes on circuit, competition, run ... and which requires performing parts , reliable and strong!
Technical characteristics:
-Carburetor 32mm
-Diameter of the tulip (for air filter): Ø54mm.
-Diameter for flexible sleeve or pipe: Ø40mm.
-Support for depression: no
- Main jet 122
Secondary nozzle 42
-N68E needle
-Starter lever, zipper.
Reference: 370.0000
Very practical to have the most precise settings possible on your PWK, POLINI CP, KEHIN, FURYTECH, OKO carburettors ...
Reference: 342.0101
Ideal in the event of a leak, the POLINI tank gasket for PWK carburetor!
Reference: 343.0017
Ideal in case of fuel leakage on your PWK carburetor.
Reference: 342.0111
Ideal in case of breakage or loss of your needle, several sizes to choose from!
Reference: 342.0103
Ideal in case of loss or breakage, the tank cap for your type PWK carburetors!
Reference: 342.0108
Ideal in case of wear, loss or breakage on your type PWK!
Reference: 342.0109
Ideal in case of loss! Two models to choose from.
Reference: 342.0107
Ideal in case of loss and complete for your PWK! Two models to choose from.
Reference: 342.0102
Ideal in case of wear, breakage, loss ... on your PWK carburetor.
Reference: 342.0105
Ideal in case of wear, loss ... On your PWK type carburetor!
Reference: 342.0106
A complete cover kit for your PWK carburetors! Two models to choose from.
Reference: 342.0117
Available in 3 sizes to choose from depending on the diameter of your PWK carburetor!
Reference: 342.0115
Ideal for tweaking your PWK carburetor settings, has 4 ersions!
Reference: 343.0019
A cable choke kit that mounts on all POLINI CP or PWK carburettors regardless of the brand !!!
Reference: 342.0129
Ideal for fine-tuning your settings and modifying the performance of your carburetor!