Reference: 01486_72
Main Jet For DELLORTO Carburetor Small Pitch 5mm Thread 8mm Length Genuine (INC Certified)
Certified DELLORTO INC! Choose real DELLORTO quality!
Banner
This carburetor will offer excellent performance with, like all PHBE carburetors, easy and precise adjustments, a round bushel, simple fuel inlet, cable choke, with separate lubrication and without integrated vacuum. PHBE 34 BD model, ideal for supporting advanced engine preparations.
An authentic carburetor reserved for competition, the DELLORTO PHBE 34 BD is specially designed for the largest 2-stroke engine configurations. It has a huge round bushel, a large intake tulip for better inlet air intake, adjustments are made very easily thanks to the machined aluminum tank cap and easily removable for changing your nozzle, control and cleaning your carburation...
The accessories are all precisely machined from aluminum alloys. This carburetor will certainly have a less good recovery than a flat bushel carburetor, but it will be able to allow you to reach very high speeds without any problems! This carburetor has a very good architecture similar to the famous DELLORTO PHBH, but significantly improved compared to the latter.
The needle wells, the bushel cut, etc... everything has been revised for greater performance and operational reliability. This model is delivered with a single fuel inlet, nothing prevents you from changing the inlet to a double inlet for a better arrival.
A very large carburetor for assured performance and exceptional quality, this model is very well pre-adjusted with the equipment presented below.
Technical characteristics :
Sport
Ø34mm
motor connection: 44mm
air filter connection: 39mm
main jet 158
secondary nozzle 50
mixing tube AB270
needle K03
with traction choke
We recommend this carburetor on 50cc gearboxes equipped with large configurations like the PARMAKIT 110cc! Or on the APRILIA RS 125cc, CAGIVA MITO and other unbridled 125cc 2T with exhaust, valves...
Reference: 01486_72
Certified DELLORTO INC! Choose real DELLORTO quality!
Reference: 53022_00
Ideal for lost or wear your old screws wealth.
Reference: 08294_00
A practical choke, sold complete with lever support, zipper, piston, spring, axis ...
Reference: 07745_00
Ideal in case of breakage or wear your old screws. This will prevent a complete change of your carburetor and make a repair cost.
Reference: 07346_00
Indispensable for the maintenance and operation of your carburetor.
Reference: 07746_65
Ideal for lost or wear or just to adjust your carburetor accurately as possible.
Reference: 06109_00
The spare fuel filter for your SHA carburettors, PHBL, PHBN, PHBE ...
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 06413_51
Size available 51 240! Sprinklers with INC certified scale to have an as accurate as possible carburetor adjustment. So no loss of power and especially a motor strength at the top.
Reference: 362.0002
POLINI nozzle box, to refine your settings. Can be mounted on DELLORTO PHVA, PHBL, PHBH, PHBN, VHSH, VHST,… And many other models!
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 1282
Ideal for lost or just for a refurbishment without spending too much.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 08530_01
Indispensable to polish up your settings and to obtain optimum operation of your engine.
Reference: 08540_260
Indispensable replacement in case of wear, loss or simply for precise adjustment of your DELLORTO PHBE carburetor.
Reference: 10295_36
Indispensable part for fixing your air filter and a good air intake in your PHBE carburetor. Available in several sizes.
Reference: 52546_00
An essential seal set for a complete refurbishment of your PHBE carburetor.
Reference: 08550_00
DELLORTO spare valve spring sold only for carburetor PHBE, PHBH, PHF and PHM.
Reference: 08525_00
Indispensable for any loss or breakage of your old retaining rings.
Reference: 08542_00
Screw essential for maintaining your bushel cover. In addition to this, you need to know more about it.
Reference: 11045_00
The replacement cover for your DELLORTO PHBE carburetors.
Reference: 09042_00
Screw essential for maintaining your connection and fixing your air filter.
Reference: 10557_00
Special tank for big PHBE carburetors. Scheduled to be held with fitting cap.
Reference: 10428_00
Essential part of your PHBE carburetor for better mixing oil / petrol!
Reference: 08885_00
Spare nozzle holder, essential in case of wear, breakage or loss of your old unit.
Reference: 04568_00
Essential for fixing your fuel inlet on carburettor DELLORTO PHBE pipette, PHBH, PHBL, PHF, PHM ...
Reference: 53028_00
Full idle screw carburetors for your PHBE, PHBH, PHBL ...!
Reference: 10238_00
Replacement tank cap, essential in case of wear, breakage or loss of your old part.
Reference: 09796_00
Float balance for essential spare in case of loss or wear your old room!
Reference: 06273_00
Ideal in the event of wear, breakage or loss of your old part Single-entry model for a direct gasoline arrival in your carburation.
Reference: 10557_00
Special tank for big PHBE carburetors with double floats nonstandard size. Scheduled to be held with fitting cap.
Reference: 03704_00
Indispensable for any loss or breakage, replacement retaining rings for maintaining the floats in the tank.
Reference: 53003_00
A pack to spend your carburetor with choke cable choke lever! Wholesale Special carburetors.
Reference: 52519_00
Ideal for refurbishing your DELLORTO PHBE carburettor.